Wraith Rock Racer

Additional Information - 20x M3 Plastic Bent Rod Ends w/ Axial Width BallsThis rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better. No including balls...

Spur Gear AX30672 48DP 87T for SCX10 Honcho Dingo CF100 Jeep There is no better way to improve a noisy drive train than a fresh spur gear. This is very easy to change over on your truck with just one bold and three screws. You may also want to look at...

 Axial Bevel Gear Sets Standard OVER or UNDER drives. These are uprated Bevel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100 and the Wraith & Ridgecrest. Remember - Adding teeth to the Pinion or Subtracting teeth...

img{max-width:100%}Axial 12mm Aluminum Hub - Black (4pcs) AX30429- Axial 12mm aluminum hubs black as fitted to the AX10, Wraith and Ridgecrest- Cast aluminum construction for long life performance- Molded splines resist spinning hexes inside plastic...

Axial Heavy Duty Differential Locker (2pcs) Made from strong sintered metal. Sintered metal provides superior metallurgical characteristics and can be manufacuted with very tight tolerances. Adds weight where it is needed in the axle to...

  Rock Crawler Wheel Weights for 2.2 Wheels. THIS IS A COMPLETE CAR SET These pairs of weights allow you to weigh - Two (2) Front wheels to a Maximum of 165g (5.8oz)* & Two Rear wheels to 75g (2.6oz) These have been designed to fit a...

Additional Information - Axial Pinion Gear 14T These are uprated steel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100, XR10 and the Wraith. Remember - Adding teeth to the Pinion or Subtracting teeth from the spur gear will...

Additional Information - Bearings for small gear are AX1221. They are 9mm thick and small gear 16mm and larger one 28.5mm approximately.img{max-width:100%}Gear set for Axial Transmissions This is Both the diff and idler gear for the Axail Racing...

Additional Information - STAR CUT Foam Tyre Incerts (4)for 2.2 Rock Crawler Wheels e.g. CR-01 These are a replacement foam - to improve the performace of your Rock Crawler. (Also available as a set of two,see our Other Foams- if you would like...

Additional Information - Hardened Gear set for Axial Transmissions These are All 3 the including diff and idler gear for the Axail Racing Transmissions as fitted to the 'Old' AX10, 'New' AX10 Ridgecres in Heavy Duty, Wraith and also the market leading...

Additional Information - Voltz 4600mah 7.2v RC Stick Battery This is a 6 cell NiMh battery pack. Boxed and fitted with Tamiya connector, (other connectors available on request). A great addition to your RTR Axial SCX10 giving run times of over 1...

  Rock Crawler Wheel Weights Axial WRAITH 2.2 Wheels & Tyres. These pair(s) of weights allow you to weigh Two (2) of your wheels by 60g (2.12oz)* EACH These have been designed to fit Axial Wraith wheels and tyres. They are self...

Axial Wraith and Dig Transmission DIG Kit. With this KIT Axial's dig transmission case is easily upgradable for dig function which, when installed, gives you a three function transmission. The transmission also includes all steel outputs. The...

 Axial Bevel Gear Sets Standard. These are standard Bevel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100, Jeep and the Wraith. You may also want to consider upgrading to the uprated version. Remember - Adding teeth...

  Rock Crawler Wheel Weights for 2.2 Wheels. THIS IS A COMPLETE CAR SET These pairs of weights allow you to weigh - Two (2) Front wheels to a Maximum of 165g (5.8oz)* & Two Rear wheels to 75g (2.6oz) These have been designed to fit a...

Additional Information - Fits:- TRX-4 Front, SCX10, Wraith Front.Rebuildable Super Punisher Shaft (111mm - 136mm / 4.37" - 5.35") for Axial SCX10 Rear/Wraith FrontThe ever famous Punisher shaft is now rebuildable. Offering exceptional strength and ...

Additional Information - Fits:- MT10, Axial Wriath and TRX-4 REAR.Rebuildable Super Punisher Shaft (121mm - 145mm / 4.76" - 5.7") for Axial Wraith Rear 5mm HoleThe ever famous Punisher shaft is now rebuildable. Offering exceptional strength and...

XR10 & AR60 OCP Axles Steering Knuckles SetThese items fit a range of trucks from the XR10 comp crawler to the Wraith and Ridgecrest which run the AR60 OCP axle sets. It is worth having spares of these in your box as they take a punishment on the...

Corbeau LG1 Seat 1/10th When the designers at Axial Racing set out to build the Wraith, they wanted to deliver the ultimate RC experience with all the best components. This philosophy was employed throughout the design process all the way down to...

img{max-width:100%}Voltz 2400mah 7.2v NiMh RC Stick Battery This is a 6 cell NiMh battery pack. Boxed and fitted with Tamiya connector, (other connectors available on request). A great addition to your RTR Axial SCX10 giving run times of over 1...

Additional Information - • AR60 OCP differential cover• Molded plastic• Includes two carrier bearing retainers, and two lower link/shock mounts• Compatible with Wraith and Ridgecrest axles

Additional Information - Winch Mount for Axial WraithWant to add a winch to your Axial Wraith. RC4WD has the answer. The Winch mount extends the front of the Wraith chassis to allow you to easily mount your RC4WD Warn Winch. Specifications:CNC...

Additional Information - Mud Basher 2.2" Scale Tractor TiresSpecifications:Advanced X2SS Compound OD: 5.94in / 151mmID: 2.11in / 53.6mmWidth: 2.21in / 56.3mmWeight: 5.5oz / 156gShown installed with RC4WD Raceline Monster 2.2" Beadlock Wheels for example...

  Axial Motors / Engines 20t, 27t or 55t These are the range of electric motors fitted to Axial's range of vehicles - AX10. XR10, Honcho, Dingo, CF100, Wraith & EVO Buggy. Remember - Thee more turns a motor has the more tourque it will...

Additional Information - All Axial wheels are made from super strong composite material and come in several high quality finishes so you can customize the look of your truck.Improved hex design for better fit and stronger hex areaDesigned to fit the most...

Additional Information - RC4WD 110mm Rock Krawler Shock Spring AssortmentSpecifications:Direct fit for Rock Krawler 110mm ShockEnough for One PairLength: 1.73in / 44mmRate "Blue" OD: 0.59in / 15.2mmRate "Red" OD: 0.57in / 14.6mmRate "White" OD: 0.56in /...

Additional Information - Axial Wraith Dig Transmission CaseUpgrade your current AX10 Scorpion or SCX10 with this Dig Transmission casing and add AX30793 for the Dig components. This casing is fitted to the Wraith and AX10 Ridgecrest as stock. Also works...

Additional Information - 6 Lug Wagon 2.2" Steel Stamped Beadlock Wheels (White)Specifications:Stamped Steel MaterialWhite Powdercoat FinishMultiple Offset Hub OptionsFits 2.2" Size TiresSize: 2.2inOD: 2.2in / 55.88mmWidth: 1.17in / 29.8mmNegative Offset:...

Additional Information - RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (20MM/0.75")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and...

Additional Information - Axial 10mm Shock Parts Tree • 10mm hock parts tree 2 • Molded lastic • Includes 3 different length rod ends, lower spring ups and spacers • Compatible with Wraith, Ridgecrest and EXO Will work with AX30091...

Additional Information - STAR CUT Foam Tyre Incerts (2) for 2.2 Rock Crawler Wheels e.g. CR-01 These are a replacement foam - to improve the performace of your Rock Crawler. (Also available as a set of four, see our Other Foams - if you would like...

Additional Information - RC4WD Rock Krawler RRD Emulsion Scale Dual Spring Shocks (110mm)Specifications:CNC MachinedBillet AluminumSmooth Black AnodizedRock Krawler Logo on TopDual Spring DesignHole to Hole (Compressed): 2.94in / 74.7mmHole to Hole...

Additional Information - 6 Lug Wagon 2.2" Steel Stamped Beadlock Wheels (Black)Specifications:Stamped Steel with Aluminum RingCNC Aluminum Mounting AdapterMultiple Offset Hub OptionsSize: 2.2"OD: 2.2in / 55.9mmWidth: 1.16in / 29.5mmCenter Hole OD: 0.2in...

XR10 & AR60 OCP Axles Aluminium C-Hub CarriersThese items fit a range of trucks from the XR10 comp crawler to the Wraith and Ridgecrest which run the AR60 OCP axle sets. If you are looking for plastic version you need AX30762 for C Hubs...

  Axial Motors / Engines 20t, 27t or 55t These are the range of electric motors fitted to Axial's range of vehicles - AX10. XR10, Honcho, Dingo, CF100, Wraith & EVO Buggy. Remember - Thee more turns a motor has the more tourque it will...

Additional Information - AXIAL SPRING 14 X 70MM 3,27LB/ IN (2) FIRM YELLOW