Lighting LED & Buckets

LED Basic Lighting System For Gelande II D90/D110 Body SetLighten and brighten the way when running your truck at night!Specifications: LED Length: 0.28in / 7.3mmLED Width: 0.19in / 4.95mmOverall Length: 13.5in / 345mmWeight: 0.2oz / 6gShown installed...

RC4WD 1/10 Baja Designs Squadron Pro LED LightsRC4WD has teamed up with Baja Designs to offer this awesome new licensed product to the scale community. Perfect for any project these little units work great at lighting the way. Made to fit anywhere...

Super Bright Scale Light System 2 Lighten and brighten the way when running your truck or car at night! Specifications: All unpluggable LEDDirect power by receiver290mm long LED wires140mm long base unit wiresConstant on, no flashingModule ...

LED Basic Lighting System For Mojave II 2/4 Door Body Lighten and brighten the way when running your truck at night!  Specifications: 12 LED Light setup2x 5mm White LED2x 3mm White LED2x 3mm Amber LED6x 3mm Red LEDDC...

  AX80045 Axial Racing LED Light Bucket Set  BLACK(2) There is not better or easier way to add light to your RC. Use the buckets to creat headlights. Or add them to your body. These also fit all the Fastrax Lugage racks and light bars -...

This light buckets are  a great way to add fog lights to your scaler. The light buckets come with all the hardware to mount the LED's and the buckets to your truck, light bar mounts are also included. You can exchange them with those fitted to...

1/10-1/14 D90 Small Clear LightThis new lens unit will allow you to be able to add LED lighting to your projects. Specifications:Plastic MaterialRear Hole ID: 0.11in / 3mmOD: 0.35in / 9mmHeight: 0.15in / 4mmShown installed with Gelande II D90 Hard...

Light Unit Headlight Brake / Indicator the best addition to your Axial LED Bucket set. This is the easiest and most effective way to add LED's to your RC or scaler. The in one, light unit with headlight, brake and indicators has Two 5mm bright white...

Y Harness with Tamiya Connectors for Light BarsNow offering easy plug and play wiring of your RC4WD Lightbars to any project. Specifications:Black and Red Silica Wire1x Tamiya Male Connector1x Tamiya Female Connector1x Futaba Female ConnectorTamiya...

Axial Simple LED Controller 4 WHITE 2 RED Lights This Simple LED Controller includes 4 bright white LED's, AX24258, and 2 bright red LED's, AX24253. Simple Reciever plug connection so no soldering needed. This unit will fit to any SCX10 Honcho...

"T" Style Battery/ESC TapEasily connect winches, lightbars and such with this connector. Specifications:Silicone WireT Plug Female ConnectorT Plug Male ConnectorFutaba Male ConnectorTotal Length: 6.22in / 158mmWeight: 0.46oz / 13gShown installed with...

RC4WD 1/10 High Performance SMD LED Light Bar (100mm/4")This is a all new High Performance Lightbar for any RC. Will make any project look better and add much needed lighting. Specifications:Cast Molded HousingReversible "L" brackets to fit many...

Scale Lighting System (Ver 2) The Scale Lighting System is created for the scale car or truck builder for additional realism. Specifications: Comes with connector to Servo and ESC.Lights blink when wheels are turnedComes with 12...

RC4WD 4 Channel Wireless Remote Light ControllerSpecifications:RemoteOver 50ft RangeBatteries IncludedTotal Length: 2.34in / 59.5mmTotal Width: 1.34in / 34.3mmWeight: 0.72oz / 20.5gReceiverWaterproof4 Channel OutputSmall Compact SizeOperating Voltage 6V...

RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (100mm/4")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers. Will make any...

3mm Bright White LED Lighting System Specifications:Powered by Receiver3MM LED BulbsSuper Bright White LED7.4 and 11.1 Volt CompatibleFits Lightforce Light PodsWeight: 0.49oz / 14gOverall Length: 22.2in / 565mmShown installed on RC4WD Lightforce 140...

img{max-width:100%}  Fastrax METAL Luggage Tray With Light Cluster - SMALL These are Metal racks that can be fitted to either Hard body or Lexan trucks - via a secure bolt and washer system. All you need to do is drill four 4.5mm holes. This SMALL...

Rear Detailed Lenses for Tamiya Hilux, Brusier and RC4WD MojaveSpecifications:Material: Clear PlasticHand Painted DetailsHeight: 1.4in / 35.5mmWidth: 0.55in / 14mmThickness: 0.13in / 3.3mmWeight: 0.07oz / 2gShown installed with Trail Finder 2 Truck Kit...

1/10-1/14 D90 Large Clear LightThis new lens unit will allow you to be able to add LED lighting to your projects. Specifications:Plastic MaterialRear Hole ID: 0.11in / 3mmOD: 0.39in / 10mmHeight: 0.19in / 5mmShown installed with Gelande II D90 Hard...

Fastrax 4 Light Cluster Bar with 18mm Round Lights There is no better way to light you way on those dark trails with a set of Fastrax Light. The best part, other than the great price is that they are supplied with not only the LED's but...

AXIAL UNIVERSAL LIGHT BAR SETAxial LED light bar, officially licensed by Rigid Industries! • Molded plastic construction• Includes three different length light bars• Hardware included• Universal mounting brackets included• Clear...

AXIAL 3-PORT HIGH OUTPUT LED CONTROLLERTrail runs during the day are great fun, especially with friends. Hitting those same trails at night can be just as fun, if you have the right lights! Axial’s 3 Port LED Controller gives you the ability to...

RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers. Will make...

RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (40mm/1.5")This is the all new Licensed KC HiLiTES Light Bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers. Will make any...

Red LED Holder with LED 12VThese are a 12 volt LED with the Red holder to provide trucks and trailers with a solid red brake light. Can be used as side marking lights as well. Specifications:Built in resistorEasy installationHandles up to 12 volts12"...

RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (20MM/0.75")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers. Will make any...

Light Unit Headlight Brake / Indicator the best addition to your Axial LED Bucket set. This is the easiest and most effective way to add LED's to your RC or scaler. The in one, light unit with headlight, brake and indicators has Two 5mm bright white...

  • Includes 7 different styles of light lenses• Realistic plastic lenses in clear and yellow - two tress of each. These work with the Axial Yeti rear light bar and many others.  

Fastrax 4 Light Cluster Bar with Fog Lights There is no better way to light you way on those dark trails with a set of Fastrax Light. The best part, other than the great price is that they are supplied with not only the LED's but also the lenses,...

The "Eco" Light Kit from Dinky R/C, is designed specifically to work with the V5 "StarLitt" Roof Panels.Shown Below. installed into the Twin Hammer V5 "StarLitt" Lexan Roof, Part # HRCV5 Made from .040" Black Styrene, so there's no need...

1/14 Scale Earth Digger 360L Light SystemSpecifications:4 PCS 5mm White LEDs2 PCS 5mm Red LEDs6.0 V and 12.0 V CompatibleWire Length: 37.4in / 950mmLED OD: 0.19in / 5mmWeight: 0.80oz / 23gWhat's Included:1x 1/14 Scale Earth Digger 360L Light...

RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (120mm/4.72")This is the all new Licensed KC HiLiTES Light Bar and is sure to brighten up any project with much needed lighting! This has been Officially Licensed by the KC HiLiTES...

RC4WD Light Bar Knurled NutsSpecifications:CNC MachinedID: 0.07in / 1.7mmOD: 0.18in / 4.5mmWidth: 0.12in / 3mmWeight: Less than one gramShown installed with RC4WD 1/10 High Performance SMD LED Light Bar (75mm/3") (Z-E0058) for example (Not...

LED Light Set for Blazer Body SetSpecifications:2x 5mm Super Bright White LED4x 3mm Red LED4x 3mm Yellow LEDDC Voltage: 4.5 V ~ 9 VControl Voltage: 7.4 VOperating Voltage: 7.4 VWire Length: 22.44in / 570mmWeight: 0.67oz / 19gShown installed with RC4WD...

RC4WD 1/10 High Performance SMD LED Light Bar (75mm/3")This is a all new High Performance Lightbar for any RC. Will make any project look better and add much needed lighting. Specifications:Cast Molded HousingReversible "L" brackets to fit many...

RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (75mm/3")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers. Will make any...

Fastrax 4 Light Cluster Bar with 12mm Round Lights There is no better way to light you way on those dark trails with a set of Fastrax Light. The best part, other than the great price is that they are supplied with not only the LED's but...

RC4WD KC HiLiTES KC Light SetThese are the all new Licensed KC HiLiTES Light Set. These have been Officially Licensed by the KC HiLiTES Company and is only available from RC4WD and our Dealers.Specifications:Molded Injection Plastic Highly Detailed ...

RC4WD Baja Designs Arc Series Light Bar (124mm)RC4WD has teamed up with Baja Designs to offer this awesome Arc Series Light Bar to the scale community. This is only available from RC4WD and our Dealers. This light bar will be sure to brighten any project...

RC4WD KC HiLiTES 1/5 C Series High Performance LED Light BarThis is the all new Licensed KC HiLiTES Light bar. Great for those 1/5 scale projects, HPI Baja, and Losi 5t. These have been Officially Licensed by the KC HiLiTES Company and are only...