RC Parts & Accessories

XVD Axle for Ultimate Scale Yota II G2 AxleStronger and more steering angle than stock axles.Specifications: CNC machined hard steel Heat treated 45 Degree Steering Angle Designed to fit RC4WD Yota 2 front axles Weight: 1.16oz / 33gWhat's...

Inner Fender Set for Defender D90 BodyThere is not better way to keep the inside of you chassis and your electronics clean than a set of fender / footwells, and don't forget there are some extra scale point to 'earn' also. These just need cutting out,...

RC4WD 80mm Old Man Emu Nitrocharger Sport Shock by ARBThis is the all new Licensed Scale Shock to hit the market. Licensed from ARB 4x4 Accessories. These new shocks feature a complete new design from the ground up and are built and ready to...

Gelande 2 Steering GuardThis steering guard allows for better protection of the steering and panhard bars. This will allow for better transition of climbs and provide a nice factory look. Specification:CNC MachinedEasy Installation using stock...

Mickey Thompson Metal Series 1/10 Wheel Center CapsThese are the all new Metal Series Center Cap licensed by Mickey Thompson. Add the extra scale realism to your build with these highly details accessory. Specifications:CNC MachinedBillet...

RC4WD 1/10 Hi-Lift JackThe one and only Hi-Lift jack, now offered in 1/10 scale size and fully functional down to the smallest details. There are imitators, but no one lives up to the one and only Hi-Lift. These have been Officially Licensed by...

Scale Steel Punisher Shaft V3 (3.56"-4.35" / 90.5mm-110.5mm)Now in third generation design! Works with most trucks and transmissions. Designed to allow more smooth rotation and strength. Specifications:Advanced internal splineIndustrial Grade...

Front Inner Fender Set for Mojave / Hilux BodyThere is not better way to keep the inside of you chassis and your electronics clean than a set of fender / footwells, and don't forget there are some extra scale point to 'earn' also. These just need cutting...

LED Basic Lighting System For Mojave II 2/4 Door Body Lighten and brighten the way when running your truck at night!  Specifications: 12 LED Light setup2x 5mm White LED2x 3mm White LED2x 3mm Amber LED6x 3mm Red LEDDC...

3 Link Kit For Trail Finder 2 Front Axle w/Panhard Setup This is the front 3 Link Mount CAD for the Trail Finder 2. This can be used to replace the stock front leaf spring setup with a more advanced 3 link style setup. Includes everything you need for...

Inner Fender Set for Axial WraithSpecifications: Polycarbonate MaterialProtective FilmEasy installPaint-able Shown installed on Axial Wraith (Not Included) Shown installed on customers Axial Wraith (Not Included)...

Gelande Side Rock Sliders Here is another great product for the Gelande truck. These new rock sliders will work with either the Hardbody, or the Lexan body D90 (now discontinued). This will greatly improve the looks of your Gelande and add protection to...

Mud Flap for Gelande 2 Custom RC4WD Gelande Mud Flaps made for the Gelande 2 and work with the Defender D90 Body. Keep the mud from flying.Specification: Molded rubber compound Easy installation Size 50mm high 43mm wide and 2mm thick. There is a...

Steel Roll Bar for Trail Finder 2Are you looking for the real deal, look no further. This roll bar is the ultimate in protection for your Mojave body. Specifications:Heavy Duty Steel TubeHand welded Black powder-coated finishCorrosion resistant Works...

Superlift Suspension Lift Block SetSpecifications:CNC Machined AluminumSmooth Black Anodized3 Sizes (2mm, 4mm, and 6mm)Direct fit to most leaf spring axles (RC4WD and Tamiya)Shown fitted to Yota Axles Front Z-A0058 Rear Z-A0061 on and Trail...

Yota II Ultimate Scale Cast Axle (Front)The most Scale and complex Axle on the market just became even better! Extremely Scale to the smallest details, such as innovative round knuckles (just like the real thing), Removable offset third member and...

Tough Armor Steel Side Sliders for Gelande IIA great addition to any Gelande 2 build. Fitting under the body gives extra protection and make removing the body easier than other slider.Specifications:CNC Machined Heavy Duty Steel TubeHand...

4 Link Kit for Trail Finder 2 Rear Axle This is the rear 4 link conversion for the Trail Finder 2. This can be used to replace the stock rear leaf spring setup with a more advanced 4 link style setup. Includes everything you need for the swap and all...

  Fuel Cell Radio Box Replacement Radio box for TF2 and G2. Can be used to protect your sensitive electronics from the elements. An aluminium version in Red Z-S1122 and Black Z-S1093 are also available. These can be used in...

RC4WD Super Scale 1/10 Rubber Mirror (Style A)There are other styles for Rubber Mirrors.Specifications:Easy InstallationHighly DetailedFits Many Body OptionsCan be used on Lexan and Hard-bodiesFlexible Rubber Chrome Mirror DecalWeight: 0.2oz /...

Installation Tool for Mickey Thompson Metal Series 1/10 Wheel Center CapsThis is an installation tool for the new Mickey Thompson Metal Series 1/10 wheel caps. This tool can be used with a hex driver to install and remove the hub. Made from non-marking...

Super Scale Shock Boot (Red)Shock Boots protect exposed shock absorber shafts against flying rocks, dirt, and mud, while enhancing the appearance of your suspension. Available in Red Z-S0948, Yellow Z-S0962, Black Z-S0981, Blue Z-S0961, Green...

R3 Scale Single Speed TransmissionThis is the all new R3 Scale Single Speed transmission that is used in the Gelande 2.Specifications:Cast Metal CasingClockable Motor Mounting (10 different positions)CNC Aluminum Motor MountSingle SpeedGear...

Hilux 4WD Emblem Set for Mojave and Hilux Body PLEASE NOTE this is for TOY RC trucks and not full size, see size below. Shown above with no paint or detailing as supplied.  Specification: Made from Stainless Steel Thickness 0.4mm 28mm long and max...

64t Delrin Spur Gear for R3 2 Speed TransmissionThis is the stock spur gear as fitted to the R3 2 speed transmission in the Trail Finder 2. Other options available are 52t Z-G0068, 56t Z-G0064, 60t Z-G0048 and 64t Z-G0055.REMEMBER - Increasing the...

These come in three sizes 70mm Z-D0034 80mm Z-D0036 and 90mm Z-D0038. Please check title for the size you are buying.Shock boot links are below to help protect the shafts and add some more scale detail to your truck.RC4WD 70mm Old Man Emu...

Tough Armor Rear Machined Bumper Mount for Trail Finder 2These are the mounts needed to install the Tough Armor Rear Machined Bumper to the Trail Finder 2 Chassis. These mounts are adjustable forward and back. This is also a great way to make you own...

1/10 RC4WD Adventure Roof Rack for Land Rover Defender Body D90 PLEASE NOTE - this is for a scale TOY car and not full size truck. Manufactured from strong, industrial grade round steel, this roof rack features a rail floor, rear ladder. Engineered to...

(1) U-Bolts Kit for Yota AxleSpecifications:Steel and Aluminum PartsDesigned to fit Yota Axle onlyShown Installed on Yota Axle:What's Included:4x Steel U Bolts (Silver)2x Aluminum Plate (Black)8x Nylock Nut M3 (Silver) (Z-S0627)Required Parts:The...

1.9"/2.2" 6 Lug Steel Wheel Hex Hub +6 OffsetThis is an Optional Hub for the 6 Lug Stamped Wheels. These provide additional offset compared to the stock Hub. These are available in different off-sets +3mm Z-S0774 +6mm Z-S0779 and...

img{max-width:100%} Tough Armor Side Single Bar Sliders for Trail Finder 2Tough Armor sidebars are built for protection of the side body panel without sacrificing ground clearance.Specifications:Heavy duty steel tubeHand weldedIndustrial-strength...

1x Yota Steel Front Axle ShaftHeavy duty steel material, fit X-0483 Z-S0058 Black Yota or Silver version Z-S0019 as fitted to the Trail Finder 2 Kit Z-K0042.You may also want to considering upgrading to XVD for improved reliability and...

RC4WD Super Scale 1/10 Rubber Mirror (Style B)There are other styles for Rubber Mirrors.Specifications:Easy InstallationHighly DetailedFits Many Body OptionsCan be used on Lexan and Hard-bodiesFlexible Rubber Chrome Mirror DecalWeight: 0.2oz /...

You may also want to fit some Wheel Weights while you change you tyres over and have a look at the selection of 1.9 Tyres in stock.Mickey Thompson Classic Lock 1.9" Internal Beadlock WheelThese are the all new Licensed Classic Lock...

K44 Ultimate Scale Front AxleThis is the best reproduction to date on a Scale Axle. The K44 Axles have been designed from the ground up with input from some of the top scale builders in the world. With smaller Axle tubes, high steer knuckles, and many...

RC4WD Drive Flange Hub ToolThis is a tool designed to install the scale hubs. (Z-S0756) Other Hubs HERE.Tool shown here with a Hub (Z-S0756)What's Included:1x RC4WD Drive Flange Hub ToolRequired:You will need a standard 7mm hex driver to help you install...

RC4WD Billet Aluminum Fuel Cell Radio Box (Black)A great way to add that finishing touch of scale detail to your rig. These come in two colours Black Z-S1093 or Red Z-S1122 - check listing heading for which item you are buying...

Triton Transfer Case (1:1)This is the all new Triton Transfer Case. Can be used in the Trail Finder 2 Z-K0042 and Gelande 2 Z-K0001. The scale detail is unmatched. The cast case provides ultra good looks and the super strong gears inside allow you...

RC4WD Tightfit Truck Topper for the Mojave and Hilux BodiesThe new RC4WD Tightfit Truck Topper is the perfect addition to your truck. Help hide and protect what your hauling and do it with style. The Tightfit Topper has total realism in mind...

Tough Armor Side Steel Sliders for Trail Finder 2 Awesome new design to the Tough Armor series products. Allows for great protection on the Trail Finder 2 kit. Offers more strength and durability. Easy to install with stock hardware M3 x 16mm. These can...