Lexan inc Interiors

Front Inner Fender Set for Mojave / Hilux BodySpecifications:Lexan MaterialIncludes Protective FilmEasy InstallationPaint-ableWeight: 0.56oz / 16gShown installed with RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) for example (Not...

Inner Fender Set for Axial Wraith Specifications: Polycarbonate Material Protective Film Easy install Paint-able Shown installed on Axial Wraith (Not Included) Shown installed on customers Axial Wraith (Not Included) What's Included: 1x...

Scale Bench Seat for Mojave Body This is a Bench seat that will fit the Trail Finder 2 Mojave body set. This will also fit the Tamiya Bruiser and Hilux. Specifications: Molded Black Plastic OEM fit Fits Trail Finder 2 Mojave Body Set Fits Tamiya...

img{max-width:100%}Straight or Curved ScissorsFor the small cost of a pair of lexan scissors it is worth it to get a nice clean line to your news lexan rc body. I have been using a set of these now for a few years and have carried out a lot of other RC...

RC4WD Action Figure - MikeSpecifications:Material: PlasticBall Cap with RC4WD LogoWhite T-Shirt with RC4WD Logo on frontPlaid jacketDark gray jeansFlexible bodyHeight: 5.79in / 147mmWidth: 2.17in / 55mmWeight: 1.69oz / 48gShown installed with Spare Tire...

AX04028 Wraith Interior Set - .040" (Clear)   Give your Wraith? a custom look by painting this interior body set. Includes interior and dash, molded in clear .040" polycarbonate plastic. This set also includes a colorful pre-cut decal sheet...

Gelande II D90/D110 DashShown installed on Gelande II D90 Hard Plastic Body Kit (Z-B0008) (Not Included) What's Included:1x Gelande II D90/D110 DashNotes:Fits Gelande II D90 Hard Plastic Body Kit (Z-B0008)Fits RC4WD Gelande II Truck Kit w/D90 Body Set...

img{max-width:100%}Straight or Curved ScissorsFor the small cost of a pair of lexan scissors it is worth it to get a nice clean line to your news lexan rc body. I have been using a set of these now for a few years and have carried out a lot of other RC...

RC FOAM Body Shell Pin PROTECTION 10 Ten Foam body protectors from Fastrax. Have you had trouble with the paint wearing around the body mounts? Does your RC boddy rattle? Hear is the solution - simply add these between your posts / pins then add your...

img{max-width:100%}Axial 2012 Jeep Wrangler Unlimited Rubicon Clear ROOF- .040" - Roof Only inc stickersFor Axial SCX10 Honcho Dingo Long wheelbase, (313mm 12.3")There is not better way to make your RTR your own then painting one of these in...

Rear View Mirror for Hilux, Bruiser, and Mojave Specifications: Weight: 0.1oz / 3gWhat's Included: 1x Rear View Mirror for Hilux, Bruiser, and MojaveNotes:Fits RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084)Fits RC4WD Trail Finder 2...

1x Scale Driver Figure Designed to fit Tamiya Hilux, Blazing Blazer, Mountaineer or Bruiser. Specifications: High quality hard plastic Easy to be painted with Tamiya or similar paint Two type of head Shown Painted in a RC4WD Trail Finder 2...

This is a kit to build the picture shown. There is a clear bed that needs to be cut and then painted, decals / stickers are supplied. The cage also needs to be built up - however hardware is included for you. • Realistic rear cage is triangulated...

Gelande II Decal Sheet for D90/D110 Hard Plastic Body Kit This is a decal sheet for the Gelande 2 for the 1/10 Land Rover Defender D90 Hard Plastic Body Kit. Offers many detailing options for any design, including two sets of silver mirror stickers...

Front Inner Fender Set for Chevy BlazerSpecifications:Lexan MaterialIncludes Protective FilmEasy InstallationPaintableWeight: 0.42oz / 12gShown installed with RC4WD Trail Finder 2 Truck Kit (Z-K0054) and Twister High Torque Metal Gear Digital Servo...

Mirror for Tamiya Hilux & BruiserSpecifications:Weight: 0.24oz / 7gWhat's Included:2x Rear view mirror (Including lenses)2x Rear view mirror mount2x Rear view mirror lenses

Fastrax Pull Tab Body Clip (6) FAST206 - These have a small pull tab to make removing them from you body easier, esspecially when you are wearing gloves, also make the a little easier to find them when you drop them! Dimentions tab 15 x 10mm

Axial’s Jeep Wrangler Rock Racer Body. Nothing says off-road worthy more than an authentic Jeep body. Named after the ever popular Recon G6 events, this body is G6 Certified!• Includes clear body, windshield and headlight buckets•...

10x Silver Steel Body Clips (1.21mm)Specifications:1.21mm Wire DiameterWhat's Included:10x Silver Steel Body Clips (1.21mm)

PROLINE BACK HALF CAGE FOR PL CAB ONLY CRAWLER BODY (SCX10) Introducing the brand-new Back-Half Cage from Pro-Line, which allows you to put Pro-Line Cab Only Bodies on your TRX-4, Venture, Ascender or SCX10 II! The new Back-Half Cage opens a whole new...

Clear Lexan Windshield for Tamiya Jeep Wrangler Body Specifications: Polycarbonate MaterialDesigned to fit Tamiya Jeep Wrangler body only What's Included: 1x Lexan Windshield for Tamiya Jeep Wrangler Notes:...

Gelande II D90/D110 Inside Door PanelsWhat's Included:2x Gelande II D90/D110 Inside Door Panels (Left and Right)

PROLINE 1985 TOYOTA HILUX SR5 CLEAR BODY (CAB+BED) SCX10 313 Toyota fans rejoice! Pro-Line is pleased to announce the release of the fully licensed 1985 Toyota HiLux SR5 body for the SCX10 Trail Honcho! Pro-Line brings another iconic crawler back to...

This is a Body Mount Thumbwasher Replacement Kit for Pro-Line Body Mount Kits (#6070-00 , #6087-00 , #6071-00). Do you need replacement screw on body thumbwashers for your Pro-Line Extended Body Mount Kit? This includes new thumbwashers, setscrews and...

Clear Window for Tamiya Clod Buster This is a clear Lexan window for the Tamiya Clod Buster Body. Specifications: Polycarbonate body Designed to fit Tamiya Clod Buster body only What's Included: 1x Clear Window for Tamiya Clod Buster

Body Post and Mount set for SCX10, SUV's and Custom Builds This body post and mounting set is the best solution to mounting a body to your custom rig or adding an SUV style body to your SCX10 kit. Included in the set is also and antenna mount and 3 cable...

Interior for 1/18 Mini D90Specifications:ABS Plastic Injection MoldingMolded in BlackRequires AssemblyTotal Weight: 5.85oz / 65.5g Manufactured by RC4WDShown installed on RC4WD 1/18 Gelande II RTR w/D90 Body Set (Black) for example (Not Included)What’s...

Jeep Wrangler Unlimited Rubicon Clear Body This is the Pro-Line Jeep? Wrangler Unlimited Rubicon Clear Body for the Axial SCX10 Honcho Long wheelbase, (313mm 12.3") . This is the Pro-Line Jeep? Wrangler Unlimited Rubicon Clear Body. The Jeep?...

PROLINE 1946 DODGE POWER WAGON CLEAR BODY CRAWLER 313MM WB Pro-Line is proud to introduce the 1946 Dodge Power Wagon body for Scale Crawlers! This First Gen Power Wagon body style comes as 2 pieces (Cab and Bed) for an ultra-realistic look that stays...

Official licensed JCROffroad roof rack thats got room for all your scale trail accessories with plenty of tie down points, including eight LED mounting points. Two of which feature a direct mount for the 132mm Rigid LED light bar right up front. The roof...

Inner Fender Set for 1985 Toyota 4Runner Hard Body Complete SetSpecifications:Polycarbonate Lexan MaterialEasy InstallationTotal Weight: 1.41oz / 40.0gShown installed on RC4WD Trail Finder 2 RTR Chassis for example (Not Included)Shown installed on RC4WD...

PROLINE 1965 FJ40 TOYOTA LAND CRUISER CLEAR BODY FOR TRX-4 This is a 1965 Toyota FJ40 Land Cruiser Clear Body for 12.8” your Traxxas® TRX-4®. Toyota fans rejoice! Pro-Line is pleased to announce the release of the 1965 Toyota FJ40...

PROLINE RAM 1500 CLEAR BODY FOR 1/10TH ROCK CRAWLERS Pro-Line has something new for all of the scale rock crawling fans: a RAM 1500 body! This customized RAM body is perfect for giving your rock crawler a unique look amongst the crowd of Jeeps and Fords...

Jeep Wrangler Unlimited Rubican 2012 Clear Body This is the Axial Jeep? Wrangler Unlimted Rubicon 2012 Clear Body for the Axial SCX10 Honcho long wheelbase, (313mm 12.4"), as fitted to the Jeep RTR AX90028. You may want to see this blog...

(1) Clear Lexan Windshield for Tamiya F-350 Body Specifications: Polycarbonate body Designed to fit Tamiya F-350 body only What's Included: 1x Lexan Windshield for F-350

RC4WD PRP Lightweight Competition Pro SeatThis is our newly Licensed PRP Lightweight Competition Pro Seat. This seat includes a fully functioning buckle and will give your custom build the last finishing touch it needs! This has been Officially Licensed...

10x Silver Steel Large Body Clips (1.40mm)Specifications:1.40mm Wire DiameterWhat's Included:10x Silver Steel Large Body Clips (1.40mm )

10x Silver Steel Body Clips (1.03mm)Specifications:1.03mm Wire DiameterWhat's Included:10x Silver Steel Body Clips (1.03mm )

Cherokee Roof Rails in BLACKAt Dinky R/C, we've done plenty of custom scale crawler builds over the years. And with so many Pro-Line Cherokee bodies making their way through our shop, we felt the need to come up with this scale accessory just for the...

AXIAL ROLL CAGE SIDESThe universal dove-tailed bolt-in cage is made to fit bodies modified for maximum clearance. This cage is compatible with AX04038 Jeep® Wrangler Rock Racer Body and AX04039 AX10 Deadbolt Body.• Molded plastic construction...