Recievers RX

Additional Information - Etronix 22AWG Futaba Twisted Y Extension Wire - 10cm ET0751

Additional Information - Key Features Eliminates the need for a separate battery for the receiver and servos Overview Our Battery Eliminator Circuit is a little device that eliminates the need for a receiver and servo battery pack. It draws higher...

Additional Information - ETRONIX RECEIVER POWER CAP Ensure your receiver has the correct operational voltage at all times and avoid possible voltage drop when using high power, high current servos by using this power cap from Etronix. Simply plug into...

Additional Information - Fuel Cell Radio BoxReplacement Radio box for TF2 and G2. Can be used to protect your sensitive electronics from the elements. Specifications: Molded PlasticCan Also be Used on Axial SCX-10 Shown installed on...

Additional Information - CC BEC 2.0 Waterproof - 15A Voltage Regulator, 50V MaxP-CC010-0153-00

Additional Information - This is the Castle Creations BEC 2.0 BEC Voltage Regulator. The CC BEC 2.0 features heavy duty, dual output wires that will provide clean power to sensitive radio equipment. Castle Link2 can be used to set the output from 4.75 to...

Additional Information - Etronix 22AWG Futaba Straight Servo Wire - 30cm

Additional Information - DESCRIPTION Part No. SSD00386 1.9" Prospect Wheels (Grey) FEATURES ...

Additional Information - Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit.Set up of programmable options with point and click easeView your current program settingsAir users can customize...

Additional Information - Battery Eliminator Circuits are small devices that eliminate the need for a receiver and servo battery pack. They draw higher voltage from the motor batteries and drop it to a voltage level that is suitable for your receiver and...

Additional Information - Etronix 30cm 22Awg Jr Straight Servo Wire

Additional Information - XR2 Ultimate Micro Radio and ESC/ReceiverTransmitter Specifications:Channels: 2Advanced 2.4GHz SystemAntenna Length: 25mmPower: 6V DC 4x AA BatteriesDisplay Mode: LED indicatorSize: 208 x 122 x 80mm / 8.18 x 4.80 x 3.15inWeight:...

Additional Information - AXIAL SCX10 RADIO BOX PARTS TREEAxial SCX10 Radio Box Parts Tree

Additional Information - RC4WD XR3/XR4 2.4Ghz 4-Channel Receiver This is our next gen 4 Channel 2.4Ghz receiver for XR4 series radio! Specifications:2.4Ghz CircuitryAuto Detect ReceiverSupport EPA, ST SPD, ST EXP, TH EXP, TH SPD, M-SEL.Build In Fail Safe...

Additional Information - SAVOX POWER CAPACITOR SAV-PC-01Ensure your receiver has the correct operational voltage at all times and avoid possible voltage drop when using high power, high current servos by using this power cap from Savox. Simply plug into...

Additional Information - FASTRAX MULTI COLOURED ASSORTED ANTENNA TUBES 6PCS FAST103-6Colour is everything, no more so than with your antenna tube. Fastrax's coloured tubes, enable you to finish off the colour coding right to the end.Supplied with 6...

Additional Information - Futaba has a locating tab on the side and JR has rounded corners. These designs are to avoid reverse connection. With modification that can be interchanged.ETRONIX BIND PLUG ET0785Etronix Universal Bind Plug JR style that will...

Additional Information - ETRONIX LI-PO REGULATOR 7.4V 5A W/CASING 20X14X49MM This cunning little unit allows the use of any battery from 9 to 25 volts to run your RX pack. Input Voltage - 9V to 25V Output Regulated Voltage - 7.4V Output Amps -...

Additional Information - ETRONIX LI-PO REGULATOR 6.0V 5A W/CASING 20X14X49MM This cunning little unit allows the use of any battery from 7 to 25 volts to run your RX pack. Input Voltage - 7V to 25V Output Regulated Voltage - 6.0V Output Amps -...

Additional Information - ETRONIX LI-PO REGULATOR 4.8V 5A W/CASING 20X14X49MM This cunning little unit allows the use of any battery from 6 to 25 volts to run your RX pack. Input Voltage - 6V to 25V Output Regulated Voltage - 4.8V Output Amps -...

Additional Information - ETRONIX RX BATTERY CASE W/BEC PLUGTakes 4 AA batteries to suply power to RX Reciever. 4-6vCan be used for other applications that require the same voltage and have a Futaba servo style connector.Size is 30 x 30 x 57mm Lead is...

Additional Information - ETRONIX RX BATTERY CASE W/BEC PLUGTakes 4 AA batteries to suply power to RX Reciever. 4-6vCan be used for other applications that require the same voltage and have a JST male connector.Size is 30 x 30 x 57mm Lead is approx 100mm...