Hardware Nuts & Bolts

80mm (3.15") Internally Threaded Aluminum Link (Black)Other Suspension Links HEREPhoto shows various sizes available (you only get the size listed)Specifications:Smooth Anodized CoatingLaser Etched sizes on the link3mm Female Threading6mm Outside...

M3 Driveshaft Screw Pin (5) These are the drive shaft pins for the Gelande II Z-K0001 What's Included: 5x M3 Driveshaft Screw Pin Notes: Uses RC4WD 1.5mm Metric Hex Driver Tool (Z-F0002) RC4WD 1.5mm Replacement Tip (Z-F0006)

3mm Black Spacer with M3 Hole (10)Specification:3mm WidthM3 Center holeDirect fit for Gelande 2What's Included:10x 3mm Black Spacer with M3 Hole  

M2 SCALEHEX BOLTSDESCRIPTIONPart No. SSD00028M2 Scale Hex BoltsHard SteelYellow Zinc PlatedFit SSD WheelsSPECIFICATIONThread:  M2 x 5mm2mm Hex HeadWHAT'S INCLUDED20 x M2 Scale BoltsFEATURES

5mm Black Spacer with M3 Hole (10)What's Included:10x 5mm Black Spacer with M3 Hole (Black)

2mm Black Spacer with M3 Hole (10)Super strong steel construction!Specifications:2mm WidthM3 Center holeDirect fit for Trail Finder 2What's Included:10x 2mm Black Spacer with M3 Hole

5mm x 9mm x 0.3mm Axle ShimsThese are made for helping shim your axles properly to give you correct gear mesh and prevent premature failure of your gears.Specifications:ID: 0.19in / 5mmOD: 0.35in / 9mmThickness: 0.01in / 0.3mmWeight: 0.03oz / 1gWhat's...

M3 LONG PLASTICROD ENDSDESCRIPTIONPart No. SSD00017M3 Long Plastic Rod EndsInjection molded black plastic rod endSteel ballNo slopAxial width ballEye to Eye Length: 19mmShaft Diameter:  6mmBall Width:  7.45mmBall Inside Diameter: 3mmWHAT'S...

M3 Long Straight Plastic Rod End (20x) This rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better. Other Rod Ends HERE. Specifications: Length :27.8mm /...

1mm Black Spacer with M3 Hole (10) Specifications: 1mm Width M3 Center hole Direct fit for Gelande 2 Steel contruction What's Included: 10x 1mm Black Spacer with M3 Hole (Black)

Axial Narrow 12mm Aluminum Hub - Black (4pcs) AX30427 ? Axial narrow 12mm aluminum hub ? black? Cast aluminum construction for long life performance? Molded splines resist spinning hexes inside plastic wheels? Set screw lock keeps them firmly in...

M3 SHORT PLASTICROD ENDSDESCRIPTIONPart No. SSD00020M3 Short Plastic Rod EndsInjection molded black plastic rod endSteel ballNo slopAxial width ballEye to Eye Length: 15mmShaft Diameter:  6mmBall Width:  7.45mmBall Inside Diameter:...

img{max-width:100%}Axial 12mm Aluminum Hub - Black (4pcs) AX30429- Axial 12mm aluminum hubs black as fitted to the AX10, Wraith and Ridgecrest- Cast aluminum construction for long life performance- Molded splines resist spinning hexes inside plastic...

1.9"/2.2" 6 Lug Steel Wheel Hex Hub +9 OffsetThis is an Optional Hub for the 6 Lug Stamped Wheels. These provide additional offset compared to the stock Hub. These are available in different off-sets +3mm Z-S00774 +6mm Z-S0779 and +9mm Z-S0780,...

10mm (0.39") M3 Internally Threaded Aluminum Link (Black) Specifications:  Smooth Anodized Coating  3mm Female Threading  6mm Outside Diameter 10mm (0.39") End to End Internal thread M3 Laser Etched Size Listed on Link What's...

SCALE LOCKING HUBS (RED)DESCRIPTIONPart No. SSD00011Scale Locking Hubs (Red)FEATURESCNC Machined AluminumM4 Locknut installedRealistic plastic faux manual lock detail Diameter:  10mmHeight:  10.5mmWeight:  1...

RC4WD M3/M4 Plastic Short Rod Ends This rod end is an all new advanced plastic compound from RC4WD. The plastic end will accept M4 threads and the ball M3. Specifications: Plastic Body and Steel Ball Black Varnish Coating Ball Width: 0.27in / 6...

Replacement Hardware for Front Yota AxleSpecifications: 4x M3x8mm BHCS (Black) 4x M3x3mm BHCS (Black) 10x M2x6mm SHCS (Black) 2x 0.5mm Spacers 4x M3 Brass BushingsWhat's Included:1x Replacement Hardware for Front Yota...

T-Rex 60 & K44 Brass Knuckle Bushing (8) These are the brass bushings used to install the knuckles onto the T-Rex 60 axles. Both plastic and aluminum version.  CNC machined  Fits T-Rex Plastic Axle (Part Z-A0076) and Aluminum axles (Part...

Scale Front Locking Hub Installation ToolMade for Scale Front Locking Hubs (part # Z-S0720)Shown with hub (Z-S0720) for example (Not Included)What's Included:1x Scale Front Locking Hub Installation Tool

Scaler & Crawler Screws & Support Bag (Black)Essential for any Scaler or Crawler to have in their tool box. Also available in silver with part number Z-S0445 Mainly 2.5mm Hex drive head Driver HEREWhat you will get:20x M3x6mm SHCS (Black)20x...

M3 Straight Medium Length Plastic Rod End (20x)This rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better.Specifications:Length: 23.9mm / 0.941inchWhat's...

M4 Nylon Lock Nut (Black) (10pcs) AXA1045 Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping and also a large base for fit hold of your wheels.• M4 Nylon Lock Nut (Black)...

6mm Black Spacer with M3 Hole (10)Specification:Thickness: 0.24in / 6mm ID: 0.12in / 3mmEach weight: 0.01oz / 0.3gWhat's Included:10x 6mm Black Spacer with M3 Hole (Black)

AXIAL M3X8MM CAP HEAD SCREWS (BLACK) (10)Axial M3X8mm Cap Head Screws (Black) (10)

Replacement Axle Hex Pins (12)These are the pins used in our most common axles. They go in the drive axle behind the hex. Specifications:Length: 10mm/0.394inchOutside Diameter:   M2Suitable for 12mm ,14mm axles hexesWhat's Included:12x...

Flanged Ball 3x5.8x7mm (6pcs)Keeping you suspension running smoothly for longer is key whether you are running a Wraith, EXO, SCX10 or the AX10. There has now been no better or easier way to do this than with a few packs of these. Steel contruction means...

M3 Offset Short Plastic Rod End (20x)This rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better.Specifications:Length: 20mm / 0.783 inchWhat's Included:20x...

4x RC4WD 12mm Axle Wheel Hex Set Here are the replacement wheel hexes for many popular RC4WD axles. These fit on most axles except the Bully line. (Please see the photos to help confirm)Specifications: 12mm Hex CNC Machined 5mm thick Whats...

RC4WD Miniature Scale Hex Bolts (M1.6 x 4mm) (Silver)The first scale hex bolts made for R/C. Taking scale to the next level.Specifications:High Grade SteelDurable Silver FinishedWeight: 0.1oz / 2gCombined Weight: 0.1oz / 3gShown installed in...

Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.Screw Shaft M4x2.5x12mm (6pcs)Precision hex head for the best fit which helps prevent strippingMade from durable black coated...

Adjustable Heavy Duty Metal Servo Arm for Futaba Type ServoCustom made for Futaba type of servo. Such as Z-E0035 servo.Specifications:Heavy Duty Aluminum MaterialCompact light weight designWhat's Included:1x RC4WD Adjustable Metal Servo Arm

Steel Flat Head Cap Screws M3 x 14mm (10)What's Included:10x Steel Flat Head Cap Screws M3 x 14mm (Black)Notes:Uses RC4WD 2.0mm Metric Hex Driver Tool (Z-F0003)RC4WD 2.0mm Replacement Tip (Z-F0007)

Regular M2.5 Black Nuts (20)Specification:Combined Weight:0.31oz / 9gWhat's Included:20x Regular M2.5 Nuts (Black)Notes:Fits Mickey Thompson Mickey Metal MT-28 Internal Beadlock Stamped 2.2" Steel Wheels (Z-W0141)Fits Mickey Thompson Mickey Metal...

20x M3 Plastic Bent Rod EndsThis rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better.Specifications:Heavy Duty PlasticFlanged Steel Balls24mm Long...

RC4WD 1/10 Warn 9.5cti Winch CNC Mounting PlatesThese plates will allow for mounting your 1/10 Warn 9.5cti winch in many applications. These allow for you to have multiple mounting options and are a direct fit to the winch. Specifications:CNC...

Heavy Duty Metal Servo Arm 24t HitecSpecifications: @font-face { font-family: "Arial"; }@font-face { font-family: "Times"; }@font-face { font-family: "宋体"; }@font-face { font-family: "Cambria Math"; }@font-face { ...

Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M2x10mm Cap Head (Black) (10pcs)• Precision hex head for the best fit which helps prevent stripping• Made...

Nylock Nuts M2 (Black)What's Included:20x Nylock Nuts M2 (Black)

Steel Socket Head Cap Screws M3 x 25mm (10)What's Included:10x Steel Socket Head Cap Screws M3 x 25mm (Black)Notes:Uses RC4WD 2.5mm Metric Hex Driver Tool (Z-F0004)RC4WD 2.5mm Replacement Tip (Z-F0008)