Axial SCX10 Motor Engine 540 size AX10 XR10 Honcho Dingo Wraith inc connectors[27t AX24004 SCX10 Honcho Dingo TR RTR]
- Calculated at Checkout
Axial Motors / Engines 20t, 27t or 55t
These are the range of electric motors fitted to Axial's range of vehicles - AX10. XR10, Honcho, Dingo, CF100, Wraith & EVO Buggy.
Remember - Thee more turns a motor has the more tourque it will generate but with lower top speed and increased runtimes. The less turns a motor has the less torque it will generate but with higher top speeds. The speed etc can also be adjusted by using a different pinion and spur gear set-up.
Adding the crawler 55t to a RTR or TR Honcho or Dingo will slow it down but give it a lot more tourque for scale crawling.
- Number of Turns: 20, 27 or 55
- Input Voltage: 4+ cells (12VDC max)
- Motor Size: 2?x1.4" (52x36mm)
- Shaft Diameter: 0.125" (3.2 mm)
- Shaft Length: .5? (12.5mm)
- Weight: 5.8oz. (164g) approximately
- Mounting Pattern: 25mm
No modificatoin is needed to use and fit this. Simply remove the the two mounting bolts on the SCX10, remove the pinon on the motor and refit in reverse, not forgetting to reset the gear mesh again. The process is simple to carry out and if you need advice please get in touch, (we can combine postage when buying mutiple items.)
This video may help . . .
Thank you for looking.
These motors have uprated bearings that are larger than some others e.g. Novak, Tekin and RC4WD - In some cases, as on the R2 RC4WD transmission you will need to widen the hole on the mounting.