RC4WD 1/10 V6 Emblem Set Z-S1131 V 6 logo 3 SIZES Metal badge 10th RC TOY

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.

RC4WD 1/10 V6 Emblem Set

• Billet Aluminum
• Large V6 Emblem Width: 0.38in / 9.8mm
• Large V6 Emblem Height: 0.23in / 5.8mm
• Medium V6 Emblem Width: 0.3in / 7.9mm
• Medium V6 Emblem Height: 0.18in / 4.6mm
• Small V6 Emblem Width: 0.22in / 5.6mm
• Small V6 Emblem Height: 0.13in / 3.4mm

• 2x Large RC4WD 1/10 V6 Emblem Set
• 2x Medium RC4WD 1/10 V6 Emblem Set
• 2x Small RC4WD 1/10 V6 Emblem Set

Notes:

• To finish and detail the emblem. Just spray paint the entire emblem with your color choice. We prefer Black
• After the paint has dried and you have good even coverage, use a fine grit sandpaper and rub the emblem on the sandpaper. Recommend a 2000 grit, or the Tamiya (V-TAM87060)
• Lightly sand until you have removed the black from the "Hilux 4WD" like shown above.
• You can then use some metal polish to further enhance the look and polish the emblem to a shiny look
• This product is easy to bend. So be careful.
• Fits RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084)
  
• Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024)
  
• Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049)