RC4WD 1/10 4 Wheel Drive Emblem Set Z-S1130 4WD logo 3 SIZES badge 10th RC TOY

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.

Specifications:

• Billet Aluminum
• Large 4 Wheel Drive Emblem Width: 0.75in / 19.1mm
• Large 4 Wheel Drive Emblem Height: 0.47in / 12mm
• Medium 4 Wheel Drive Emblem Width: 0.55in / 14mm
• Medium 4 Wheel Drive Emblem Height: 0.35in / 8.8mm
• Small 4 Wheel Drive Emblem Width: 0.36in / 9.2mm
• Small 4 Wheel Drive Emblem Height: 0.22in / 5.7mm

• 2x Large RC4WD 1/10 4 Wheel Drive Emblem Set
• 2x Medium RC4WD 1/10 4 Wheel Drive Emblem Set
• 2x Small RC4WD 1/10 4 Wheel Drive Emblem Set

• To finish and detail the emblem. Just spray paint the entire emblem with your color choice. We prefer Black
• After the paint has dried and you have good even coverage, use a fine grit sandpaper and rub the emblem on the sandpaper. Recommend a 2000 grit, or the Tamiya (V-TAM87060)
• Lightly sand until you have removed the black from the "Hilux 4WD" like shown above.
• You can then use some metal polish to further enhance the look and polish the emblem to a shiny look
• This product is easy to bend. So be careful.
• Fits RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084)
• Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024)
• Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049)