RC4WD 1/10 RS Emblem Set Z-S1135 logo 3 SIZES Metal badge 10th RC TOY

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.

RC4WD 1/10 RS Emblem Set

• Billet Aluminum
• Large RS Emblem Width: 0.54in / 13.8mm
• Large RS Emblem Height: 0.11in / 2.8mm
• Medium RS Emblem Width: 0.42in / 10.9mm
• Medium RS Emblem Height: 0.08in / 2mm
• Small RS Emblem Width: 0.3in / 7.6mm
• Small RS Emblem Height: 0.05in / 1.3mm

• 2x Large RC4WD 1/10 RS Emblem Set
• 2x Medium RC4WD 1/10 RS Emblem Set
• 2x Small RC4WD 1/10 RS Emblem Set

Notes:

• To finish and detail the emblem. Just spray paint the entire emblem with your color choice. We prefer Black
• After the paint has dried and you have good even coverage, use a fine grit sandpaper and rub the emblem on the sandpaper. Recommend a 2000 grit, or the Tamiya (V-TAM87060)
• Lightly sand until you have removed the black from the "Hilux 4WD" like shown above.
• You can then use some metal polish to further enhance the look and polish the emblem to a shiny look
• This product is easy to bend. So be careful.
• Fits RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084)
  
• Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024)
  
• Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049)