RC Bearings RC4WD Trail Finder 2 COMPLETE set Metal or Rubber LONG LIFE[Rubber Shielded Bearings]

Do you want to:Improve Performance; Longer Runtimes; Reduced Noise?

. . . This is what you need.

Bearings are an essential part of your model. Your first upgrade on any model supplied with bushes is to replace them with bearings. This will improve performance, battery runtime and reduce noise levels from your model.

If you are already running bearings, check to see they are all still running freely. Over time dirt and grit starts to bind them and you will loose performance from your model. This is often overlooked and can cause more damage to surrounding parts that are costly to replace. Make checking bearings an essential part of your RC mantenance / inspection.

The bearings come pre-lubricated, so all you have to do is fit them to your model. So dig out your manual and start feeling the benefit of new bearings - why not order two and have one on the shelf so you always have a first class RC to drive, (no extra postage cost too.)

This set contains, All the bearings you need -

34 bearings for the RC4WD Trail Finder Two*

Kit Z-K0042

Rubber shielded ball bearings work well when the bearing is likely to make contact with dirt and dust, such as wheel bearings.

* Points to note - These are not Manufacturers Bearings but aftermarket ones, (I have run a tested these in a heavy truck of 8kg in harsh scale and crawling enviromnets and they are first class.) Also the pictures are for representation and do not show what is in the kit.