RC Bearings TAMIYA CR01 CR-01 All Models COMPLETE set Metal / Rubber LONG LIFE[Rubber Shielded Bearings]
- Calculated at Checkout
Do you want to:Improve Performance; Longer Runtimes; Reduced Noise?
. . . This is what you need.
Bearings are an essential part of your model. Your first upgrade on any model supplied with bushes is to replace them with bearings. This will improve performance, battery runtime and reduce noise levels from your model.
If you are already running bearings, check to see they are all still running freely. Over time dirt and grit starts to bind them and you will loose performance from your model. This is often overlooked and can cause more damage to surrounding parts that are costly to replace. Make checking bearings an essential part of your RC mantenance / inspection.
The bearings come pre-lubricated, so all you have to do is fit them to your model. So dig out your manual and start feeling the benefit of new bearings - why not order two and have one on the shelf so you always have a first class RC to drive, (no extra postage cost too.)
This set contains, All the bearings you need -
32 Metal Shielded bearings for the Tamiya CR01 Chassis. *
Unimog 406S 58414, Ford Bronco 1973 58436, Toyota Land Cruiser 40 58405, Jeep Wrangler 58429
Should I choose Metal or Rubber Shielded Bearings?
Metal Shielded RC Bearings
Metal shielded ball bearings work well on clean surfaces and within sealed gearboxes.
Rubber Shielded RC Bearings
Rubber shielded ball bearings work well when the bearing is likely to make contact with dirt and dust, such as wheel bearings.
* Points to note - These are not Manufacturers Bearings but aftermarket ones, (I have run a tested these in a heavy truck of 8kg in harsh scale and crawling enviromnets and they are first class.) Also the pictures are for representation and do not show what is in the kit.