Etronix Sport Tuned Brushed Motor 550 - 35T

This is a standard brushed motor from Etronix, designed for use in Tamiya kit cars, FTX and Traxxas ready to run cars and similar 1/10th scale type buggy, truggy or Monster Truck...

• Supplied with pre wired 120mm leads with 4mm Bullet Classic Crimp Terminal.
• Has a 3.2mm bore diameter on the shaft, with a flat spot for pinion mounting.

Please ensure you have a suitable ESC - motors are rated in turns, you need an ESC with an equal (or ideally lower) turn limit. For example, a 15 Turn ESC will run a 15 or 19 turn motor but will not support a 13 turn. A 550 size motor can usually simply replace a 540 size, the difference is a few millimetres of length.

The higher the number, the slower the motor, the longer the run time and the more torque.

Size:

• Can Dimentions: 59 X 38mm
• Axis diameter: 3.2mm (3.175mm)
• Cage length: 60mm
• Fixing holes: Diagonal: 25mm, Horizontal: 17mm