Etronix Sport Tuned Brushed Motor 550 - 12T

This is a standard brushed motor from Etronix, designed for use in Tamiya kit cars, FTX and Traxxas ready to run cars and similar 1/10th scale type buggy, truggy or Monster Truck...

• Supplied with pre wired 120mm leads with 4mm Bullet Classic Crimp Terminal.
• Has a 3.2mm bore diameter on the shaft, with a flat spot for pinion mounting.

Please ensure you have a suitable ESC - motors are rated in turns, you need an ESC with an equal (or ideally lower) turn limit. For example, a 15 Turn ESC will run a 15 or 19 turn motor but will not support a 13 turn. A 550 size motor can usually simply replace a 540 size, the difference is a few millimetres of length.

The higher the number, the slower the motor, the longer the run time and the more torque.

Note that no standard ESCs support the 12 turn motor, this would require an ESC rated at 9 or 11 or unlimited turns, which are quite unusual.

Size:

• Can Dimentions: 59 X 38mm
• Axis diameter: 3.2mm (3.175mm)
• Cage length: 60mm
• Fixing holes: Diagonal: 25mm, Horizontal: 17mm