Fastrax Shock Shaft Pliers FAST606 Body Rod ball Ends install & removal 10th 8th

Fastrax Shock Shaft Pliers

Aluminium Fastrax Shock Pliers feature:

Slots for gripping 3mm, 3.5mm and 4mm shock shafts,

Half moons 12mm and 17mm cut outs for gripping 10th and 8th shock bodies,

Feature a post for installing andremoving the shock end pivot ball, this can alos be used for Rod Ends.

The pliers are machined in lightweight aluminum and anodized Grey / Silver with the Fastrax logo laser etched on the grips. The end pivot point is a countersunk head 2mm screw in a stepped hinge pivot so pivot wobble is pretty much non-existent. There are two different sized small half-moons on each side of the handle to grasp smaller or larger shock shafts without marring the shafts. Just behind those are two larger half-moons with notches to help grab shock bodies with little chance of marring the body while firmly grasping the body to tighten down shock caps or seal end caps. Then we get to the extra feature, shock end ball installer. The installer easily presses the ball into the shock end on most 1/10 and 1/8 shock ends. The installer can also be used to press the ball out of shock ends, or rod ends.
Material: Aluminium Alloy

Colour: Grey Anodized

Size: 150 x 40 x 10mm / 5.90 x 1.57 x 0.39inch