RC4WD

1/14 E450C Articulating Dump Truck (RTR) VV-JD00067 RC4WD Quarry Mining

(No reviews yet) Write a Review

SKU:: VV-JD00067
UPC:: 639302614709
MPN:

On Sale

MSRP: €3,239.65

Now: €3,077.66

Was: €3,239.65

— You save €161.98

Current Stock:

Out of Stock - On Order with Supplier

Description
0 Reviews

Description

Additional Information -

SPECIAL ORDER - 1/14 E450C Articulating Dump Truck (RTR)

Specifications:

CNC Machined Metal parts
Molded Steel bucket
Articulated Steering Design
10 Channel 2.4Ghz Radio
Scale Front Cab (Compatible with Driving Figure)
Powder Coated in Yellow
Massive 29.5-25L-5 Tires
Reliable Hydraulic Valve and Adjustable Pump
Optimized Steel Hydraulic System
Brushless System (Hydraulic)
40A Brushless ESC with BEC
930Kv Brushless Monster Torque Motor
2 Speed Full Metal Transmission (1:64 and 1:16 Gear Ratio)
Remote Lockable Front and Rear Axles (Locking Differential)
Scale Fully Lighting System
Payload Capacity: 25kg / 55lbs
Cylinder Maximum Thrust: 40kg / 88.1lbs
Scale: 1:14
Length: 32.2in / 818mm
Width: 9.54in / 242.5mm
Height: 10.9in / 278mm
Net Weight: 12kg / 26.4lbs
Operating oil pressure: 20Bar, 290psi
Manufactured by JDCustoms
30 Days Limited Warranty

What's Included:

1x 1/14 E450C Articulating Dump Truck (RTR)

Required Parts:

5000mAh 11.1V 50C 3S1P LiPo Battery Pack with XT60 Plug (Battery size must be no bigger than 135mm in length, 43mm in width, and 33mm in height)
Compatible Battery Charger
4x AA Batteries for Radio (Z-S1718)
Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)

Instruction Manual:

Click here to download.

Notes:

You need to hold the truck firmly and take it out of the box horizontally to prevent the front compartment from rotating and damaging the whole truck.
Using 2S, half speed at 6.5V and shut off at 6V. Using 3S, half speed at 9.75V and shut off at 9V. Do not use more than 3S battery. (11.1 volt(s))
Once the hydraulic cylinder (dump) reaches its maximum height, do not push further.
Must turn on the transmitter before starting the ESC.
ESC Supports XT60 Connector
While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some "cases" you may want to apply threadlock to some of the hardware that are already installed. (Please follow our instructions)
Use threadlock sparingly.
Do not over tighten screws, otherwise, you may strip the thread.
This product is for experienced R/C users. Not recommended if you just started with R/C.