FTX Kanyon 2-Speed Motor 20T Pinion FTX8468 20 tooth Gear 3mm bore M4 grub RC

Additional Information -

FTX8468 Kanyon 2-Speed Transmission Motor Pinion Gear 20T

Sale Information:
• Genuine 20-tooth (20T) motor pinion gear for Kanyon 2-speed transmissions
• FTX part number: FTX8468
• Designed to mount on the motor shaft and mesh with the spur gear FTX8439 (70T)
• Compatible with FTX8469 motor (35T) for correct gear ratio and operation
• Transfers motor power into the transmission for proper low/high gear function
• Fixes slipping, skipping, or noisy gear engagement caused by worn or damaged pinion
• OEM-style plastic construction ensures a precise fit
• Easy replacement for internal transmission rebuilds
• Note: Pinion does not include securing grub/set screw; use part FAST123A (M4x4mm)
• Other tooth options available for gear ratio changes: FTX6335 (17T), FTX8432 (15T) — smaller pinion teeth increase speed but reduce torque; 20T is standard for balanced performance
• Motor, spur gear, and transmission housing not included

Repair & Installation Advice:
• Check the spur gear FTX8439 (70T) for wear to ensure smooth mesh
• Inspect the motor shaft bearing or bushing to prevent misalignment
• Gear meshing tip: The pinion and spur should engage with minimal backlash — teeth should not bind or have excessive gap. Adjust pinion position on the motor shaft for smooth rotation before tightening the grub screw
• Replacing pinion and spur together ensures reliable long-term operation

Compatibility:
• Fits FTX Kanyon models with factory 2-speed transmission
• Works with complete transmission assembly FTX8440
• Compatible with FTX8469 motor (35T)
• Not compatible with single-speed or aftermarket transmissions

Related Parts / Full Rebuild Kit:
• Internal plastic gear set – FTX8442
• Transmission case – FTX8441
• Spur gear – FTX8439
• Bearings 9x 5x10x4mm – FTBB120
• Complete transmission assembly – FTX8440
• Motor – FTX8469 (35T)
• Securing grub/set screw – FAST123A (M4x4mm)