Transmissions, Transfer Cases & Slippers

Additional Information - Shifting Assembly for AX2 2 Speed TransmissionSpecifications:CNC MachinedHardened Steel What's Included:1x Shift Fork with Rod1x Shift Disc1x Shift Link MountRequired Parts:AX2 2 Speed Transmission for Axial Wraith &...

Additional Information - Internal Gear Set for AX2 2 Speed TransmissionSpecifications:CNC MachinedHardened SteelWhat's Included:1x Internal Gear Set for AX2 2 Speed TransmissionRequired Parts:AX2 2 Speed Transmission for Axial Wraith & SCX10/Honcho...

Additional Information - AXIAL ZERO ACKERMAN STEERING PLATE (2)

AXIAL DIG LOCKOUT SHAFT

Additional Information - 1x RC4WD Ultra Compact 4:1 Gear Reduction Unit for 540 Motor Decrease speed and increase torque! Where can you use this product: This gear reduction unit is designed to fit any RC truck, car, robot, airplane, boat that...

Additional Information - TF2 Long Drive Shaft Coupling for R3 Single SpeedSpecifications:Shaft Size: 0.19" (5mm)Length: 2.2" (56.85mm)OD: 0.43" (11mm)Screw Holes: M3What's Included:1x TF2 Long Drive Shaft Coupling for R3 Single Speed2x Single M3...

Additional Information - Axial 15X21X4mm Bearing (2) Bearing for the ouput shaft on the Wraith dig transmission. Fits to AX30437 and into casing AX80051.

Additional Information - Axial’s new machined cap head washers are designed for motor mount screws. Perfect for big power applications when maintaining gear mesh is critical. These washers will also prevent motor mount screws from digging into your...

Additional Information - Diameter approximately 52mm x 6mm thick and centre hole 10mm.Axial plastic 32 pitch spur gear. ��� Molded plastic construction for durability��� 32 pitch for strength��� Compatible with the Yeti rock racer (AX90026)��� Hardware...

Additional Information - Axial’s new steel 32P pinion gears for the EXO Terra Buggy offer you an array of gearing options to fine tune torque and top speed.• Powder steel construction for durability• Includes two set screws per...

Additional Information - • Transmission set• Molded plastic• Complete replacement transmission case for SCX10 and AX10

Additional Information - Axial SCX10 & AX10 Steel Outdrive Shaft Set (2pcs)Replaces the old aluminum version outdrive shaft [AX30404] in SCX10/AX10's. The Steel Outdrive Shaft is cross drilled for secure pin attachment as on the new WB8 driveshafts...

Additional Information - • SCX10/AX10 motor plate• Aluminum construction • Black anodize• Laser etched logos

Additional Information - Ultra Scale Hardened Steel Driveshaft (145mm - 180mm / 5.70" - 7.08") 5mmSpecifications:CNC MachinedHeavy Duty SteelHeat TreatedAdvanced Internal SplineUltra Scale LooksRebuildableHigh Operating AngleFits on 5mm ShaftsLength: 5...

Additional Information - Motor Mount for R4 TransmissionSpecifications:Billet AluminumLength: 1.99in / 50.5mmWidth: 1.78in / 45.1mmThickness: 0.20in / 5mmWeight: 0.9oz / 23gShown installed with RC4WD TCI Heavy Duty R4 Single Speed Scale Transmission...

Additional Information - Internal Gear Set for R3 Single Speed TransmissionSpecifications:CNC MachinedHeat TreatedHardened 45# SteelCoated BlackGear Ratio: 1.78:1Wide Steel .32 Pinion GearDelrin Spur GearWeight: 2.65oz / 75gShown installed with R3 Scale...

Additional Information - Fits - TRX-4 Front, Trail Finder TF2 adn Best front and middle.Rebuildable Super Punisher Shaft (100mm-118mm, 3.94"-4.65") 5mm HoleThe ever famous Punisher shaft is now rebuildable. Offering exceptional strength and impeccable...

Additional Information - RC4WD Skid Plate for Trail Finder 2 V8/R4Specifications:Die Cast Skid PlateMaterial: IronDesigned to Work with Trail Finder 2 V8 / R4Length: 2.36in / 60mmWidth: 3.39in / 86mmHeight: 0.93in / 23.6mmThickness: 0.04in / 1mmWeight: 1...

Additional Information - Metal Drive Extended CouplingSpecifications:CNC MachinedHeavy Duty SteelLength: 2.54in / 64.5mmHead OD: 0.43in / 11mmShaft OD: 0.2in / 4.96mmWeight: 0.56oz / 16gShown installed on RC4WD Gelande II LWB Truck Kit with Defender D110...

Additional Information - Metal Drive Coupling for Gelande 2Specifications: CNC Machined Hardened SteelLength: 1.91in / 48.6mmOD: 0.43in / 11mmInner OD: 0.19in / 5mmScrew Holes: M3Each Weight: 0.7oz / 21gShown in Gelande 2 for example...

Additional Information - Full length measurements and the pins are set in about 5mm from each endPunisher Shaft II (80mm-100mm,3.15"-3.93") 5mm holeSpecifications:Advanced Internal SplineIndustrial Grade SteelUni-Joint for super smooth...

Punisher Shaft II (70mm - 80mm / 2.76" - 3.15") 5mm HoleSpecifications:Advanced Internal SplineIndustrial Grade SteelUni-Joint for super smooth operationEngineered and manufactured by RC4WDDirect fit, no modification neededWeight: 2.12oz / 60gOD: 0.55in...

Additional Information - Replacement Gears for R3 2 Speed TransmissionSpecifications:Heavy Duty Steel Gears.8 Mod1st gear = 0.033:12nd gear = 0.091:1Weight: 2.95oz / 83.5gWhat's Included: 1x Replacement Gears for R3 2 Speed TransmissionRequired Parts:R3...

Additional Information - R3 Single Speed Transmission MountsSpecifications:CNC MachinedHardened Steel Installed on Gelande 2 for example (Not Included) What's Included:1x R3 Single Speed Transmission Mounts (Left and Right)2x M3...

Additional Information - 1x R3 2 Speed Transmission ShaftsWhat's Included: _ 1x R3 2 Speed Transmission ShaftsRequired Parts:R3 Scale 2 Speed Transmission (Z-U0025)Notes: For R3 Scale 2 Speed Transmission (Z-U0025)

Additional Information - R3 Tranny Mounts For Trail Finder 2 Specifications: 1 Set R3 Tranny mounts (left and right)2x M3 x 8mm BHSC (Black)4x M3 x 10mm BHSC (Black)2x M3 x 8mm FHCS (Black) What's Included: 1x R3...

Additional Information - 52T 32P Delrin Spur GearSpecifications:Heavy Duty Delrin MaterialEngineered & Manufactured by RC4WDDirect replacement for AX2 & R3 UnitsBore Size: 9.6mmTotal Length: 5.6mmInner hole size: 0.37in / 9.6mmScrew hole size: 0...

Additional Information - Bearing kit for R3 2 Speed Transmission This is a replacement Bearing with a Metal Shield. What's Included: 7x Bearings 5 x 11 x 4mm 2x Bearings 5 x 8 x 2.5mm 2x Bearings 5 x 10 x 4mm Works on...

Additional Information - Metal Shield Bearing 5x11x4mm (10) This is a replacement bearing with a metal shield. Specifications: Size: 5x11x4mm 10 Included in bag What's Included: 10x Bearing 5x11x4mm Works on...

Additional Information - Metal Shield Bearing 5x11x5mm (10) This is a replacement bearing with a metal shield. Specifications: Size: 5x11x5mm 10 Included in bag What's Included: 10x Bearing 5x11x5mm Works on these...

Additional Information - HIGH RATIO TRANSMISSION KIT FOR WRAITH DESCRIPTION Part No. SSD00016 High Ratio Transmission Kit for Wraith ...

Additional Information - 1.55" WHEELS 1.9" WHEELS 2.2" WHEELS PARTS FOR SCX10...

Additional Information - Shaft is 35mm long. Metal Drive Coupling for Trail Finder 2 Specifications: CNC Machined What's Included: 1x Metal Drive Coupling for Trail Finder 2 2x M3 x 10mm Set ScrewRequired...

Axial Transmission Spur Gear Cover AX80078 There is no better way to extend the life of you spur gear. Fitting is so simple and while you have the transmission appart you may want to replace that worn Spur gear. Don't forget to grease all parts for a...

Additional Information - Axial Pinion Gear 15T These are uprated steel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100, XR10 and the Wraith. Remember - Adding teeth to the Pinion or Subtracting teeth from the spur gear will...

Spur Gear AX30672 48DP 87T for SCX10 Honcho Dingo CF100 Jeep There is no better way to improve a noisy drive train than a fresh spur gear. This is very easy to change over on your truck with just one bold and three screws. You may also want to look at...

Additional Information - Hardened Gear set for Axial Transmissions These are All 3 the including diff and idler gear for the Axail Racing Transmissions as fitted to the 'Old' AX10, 'New' AX10 Ridgecres in Heavy Duty, Wraith and also the market leading...

Axial Wraith and Dig Transmission DIG Kit. With this KIT Axial's dig transmission case is easily upgradable for dig function which, when installed, gives you a three function transmission. The transmission also includes all steel outputs. The...

Additional Information - Bearings for small gear are AX1221. They are 9mm thick and small gear 16mm and larger one 28.5mm approximately.img{max-width:100%}Gear set for Axial Transmissions This is Both the diff and idler gear for the Axail Racing...

Additional Information - Axial Wraith Dig Transmission CaseUpgrade your current AX10 Scorpion or SCX10 with this Dig Transmission casing and add AX30793 for the Dig components. This casing is fitted to the Wraith and AX10 Ridgecrest as stock. Also works...