Lighting LED & Buckets

RC4WD 4 Channel Wireless Remote Light Controller Specifications:Remote Over 50ft Range Batteries Included Total Length: 2.34in / 59.5mm Total Width: 1.34in / 34.3mm Weight: 0.72oz / 20.5g Receiver Waterproof 4 Channel Output Small Compact...

Additional Information - RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (100mm/4")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our...

Additional Information - RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our...

Additional Information - RC4WD Jeep JK Rampage Recovery Bumper to fit Axial SCX10 Chassis Brand New freshly Licensed by Rampage Products. The Jeep JK Rampage Recovery Bumper. These have been Officially Licensed by the Rampage Products and are only...

Additional Information - RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (20MM/0.75")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and...

Additional Information - RC4WD Baja Designs Arc Series Light Bar (124mm) RC4WD has teamed up with Baja Designs to offer this awesome Arc Series Light Bar to the scale community. This is only available from RC4WD and our Dealers. This light bar will be...

Additional Information - AXIAL UNIVERSAL LIGHT BAR SETAxial LED light bar, officially licensed by Rigid Industries! • Molded plastic construction• Includes three different length light bars• Hardware included• Universal mounting...

Additional Information - RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (40mm/1.5")This is the all new Licensed KC HiLiTES Light Bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and...

Additional Information - RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (120mm/4.72")This is the all new Licensed KC HiLiTES Light Bar and is sure to brighten up any project with much needed lighting! This has been Officially Licensed by...

Additional Information - RC4WD 1/10 Baja Designs S8 LED Light Bar (100mm)RC4WD has teamed up with Baja Designs to offer this awesome new licensed product to the scale community. Will be sure to brighten any project. Specifications:Billet AluminumMolded...

Additional Information - Metal Front Lamp Guards for 1/18 Gelande D90Specifications:Stainless Steel Powder-coatedCorrosion Resistant Total Length: 0.21in / 5.5mmTotal Width: 0.67in / 17.1mmTotal Height: 0.90in / 22.8mmShown installed with RC4WD 1/18...

Additional Information - 1/10 Square IPF Lights w/LEDSpecifications: ABS Plastic Injection MoldingStainless Steel3mm White LEDVoltage: 5.0 - 7.2VTotal Length: 0.40in / 10.2mmTotal Width: 0.71in / 18.2mmTotal Height: 0.51in / 13mmWeight: 0.13oz / 3...

Fastrax Aluminium 32 Led Light Bar W/Mounts 150Mm Wide FAST2342

Additional Information - RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (75mm/3")This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our...

Additional Information - Front Light Bar for Axial SCX10 III Early Ford BroncoSpecifications:Strong Durable Nylon HousingABS Plastic Injection Molding LensesLength: 6.25in / 159mmWidth: 0.60in / 15.4mmHeight: 0.40in / 10.2mmTotal Weight: 0.62oz / 17...

Additional Information - Sticker diameter is 17mm.1/10 Rally 3000 Hella LightsSpecifications:ABS Plastic Injection MoldingStainless Steel MountsTotal Length: 0.41in / 10.5mmTotal Width: 0.71in / 18.2mmTotal Height: 0.74in / 19mmWeight: 0.10oz / 2.8gShown...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck. Rear Light Guard for JS Scale 1/10 Range Rover Classic BodySpecifications:Stainless SteelHand WeldedBlack Powder-coated Finish Length: 1.18in / 30.0mmWidth: 1...

Additional Information - 1/10 Magnetic Portable Jerry Can SetSpecifications:ABS Plastic Injection MoldingLength: 1.14in / 29.0mmWidth: 1.14in / 29.0mmHeight: 1.63in / 41.5mmWeight: 0.28oz / 8.0gShown installed on Traxxas Mercedes-Benz G 63 AMG 6x6 with...

Additional Information - Side Marker Lights for Axial SCX10 III Early Ford BroncoSpecifications:Strong Durable NylonABS Plastic Injection Molding LensesTotal Weight: 0.15oz / 4.3gShown installed on Axial SCX10 III Early Ford Bronco with Oxer Steel Front...

Additional Information - RC4WD 1/10 Baja Designs S8 LED Light Bar (120mm)RC4WD has teamed up with Baja Designs to offer this awesome new licensed product to the scale community. Will be sure to brighten any project. Specifications:Billet AluminumMolded...

Additional Information - Hood Light Guard for Traxxas TRX-4 Mercedes-Benz G-500Specifications:Stainless SteelHand WeldedBlack Powder-coated FinishTotal Weight: 0.26oz / 7.6gShown installed on Traxxas TRX-4 Mercedes-Benz G-500 with Steel Logo Decal Sheet...

Additional Information - Front Grille Fog Lamps for Traxxas TRX-4 '79 Bronco Ranger XLTSpecifications:ABS Injection MoldedWidth: 0.39in / 9.86mmLength: 0.97in / 24.68mmTotal Weight: 0.27oz / 7.6gShown installed on Traxxas TRX-4 '79 Bronco Ranger XLT...

Additional Information - 1/10 Square IPF LightsSpecifications:ABS Plastic Injection MoldingStainless Steel MountsTotal Length: 0.40in / 10.2mmTotal Width: 0.71in / 18.2mmTotal Height: 0.51in / 13mmWeight: 0.10oz / 2.8gShown installed with Rough Stuff...

Additional Information - 1/10-1/14 Work Light (w/LED)Specifications: Stainless SteelABS Plastic Injection MoldingLaser Etching3mm White LEDVoltage: 5.0 - 7.2VTotal Length: 0.40in / 10.18mmTotal Width: 0.33in / 8.48mmTotal Height: 0.57in / 14.50mmTotal...

Additional Information - Offroad Light Set for Axial 1/10 SCX10 III Jeep (Gladiator/Wrangler)Specifications:Strong Durable Nylon?�Total Weight: 0.14oz / 4.2gShown installed on Axial 1/10 SCX10 III Jeep JLU Wrangler with Adventure Roof Rack for Axial 1/10...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.Bed Rails for 1987 Toyota XtraCab Hard BodySpecifications:Billet AluminumCNC MachinedChrome PlatedLength: 8.01in / 203.6mmWidth: 0.31in / 8.0mmHeight: 0.35in /...

Additional Information - RC4WD N-Fab Nerf Side Steps for Cross Country Off-Road ChassisThe N-Fab Nerf Side Steps for Cross Country Off-Road Chassis. These have been Officially Licensed by the N-Fab Products and are only available from RC4WD and our...

Additional Information - Pillar Lights w/ LED Light Kit for Axial 1/10 SCX10 III Jeep (Gladiator/Wrangler)Specifications:Strong Durable NylonVoltage: 5.0 - 7.2VTotal Weight: 0.21oz / 6.1gShown installed on Axial 1/10 SCX10 III Jeep JLU Wrangler with...

Additional Information - Pillar Lights for Axial 1/10 SCX10 III Jeep (Gladiator/Wrangler)Specifications:Strong Durable NylonTotal Weight: 0.10oz / 3.1gShown with a 3mm LED for example (Not Included)Shown installed on Axial 1/10 SCX10 III Jeep JLU...

Additional Information - Pillar Offroad Lights for Vanquish VS4-10 Origin Body & Axial SCX10 II Cherokee BodySpecifications:Strong Durable NylonStainless SteelTotal Weight: 0.38oz / 11.0gShown installed on Vanquish VS4-10 Pro Rock Crawler Kit w/...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck. High Rear Brake Light for MST 1/10 CMX w/ Jimny J3 BodySpecifications:Stainless SteelBlack Powder-coated Finish Plastic Injection MoldingLength: 3.25in / 82...

Additional Information - Front Lamp Guards for Traxxas TRX-4Specifications:Stainless SteelBlack Powder-coated FinishHand WeldedTotal Height: 1.75in / 44.5mmTotal Width: 1.45in / 36.7mmTotal Weight: 0.60oz / 17gShown installed on Traxxas TRX-4 with...

Additional Information - 1/10 Rally 3000 Hella Lights w/LEDSpecifications: ABS Plastic Injection MoldingStainless Steel Mounts3mm White LEDVoltage: 5.0 - 7.2VTotal Length: 0.41in / 10.5mmTotal Width: 0.71in / 18.2mmTotal Height: 0.74in / 19mmWeight: 0...

Additional Information - 1/10 Round IPF Lights w/LEDSpecifications: ABS Plastic Injection MoldingStainless Steel Mounts3mm White LEDVoltage: 5.0 - 7.2VTotal Length: 0.41in / 10.5mmTotal Width: 0.71in / 18.2mmTotal Height: 0.74in / 19mmWeight: 0.13oz / 3...

Additional Information - Turn Signal LED Light Set for Tamiya CC01 Jeep Wrangler (Detailed) Specifications: Plastic Material Voltage: 5.0 - 7.2V  Light Length: 0.61in / 15.5mm Light Width: 0.47in / 12mm Light Height: 0.24in / 6.1mm Wire...

Additional Information - Turn Signal Set for Axial 1/10 SCX10 II UMG10 4WD Rock CrawlerSpecifications:ABS Plastic Injection MoldingWeight: 0.02oz / 0.8gShown painted YellowShown with Axial 1/10 SCX10 II UMG10 4WD Rock Crawler, Front Grille for Axial...

Additional Information - 1/10-1/14 Work LightSpecifications:Stainless SteelABS Plastic Injection MoldingLaser EtchingTotal Length: 0.40in / 10.18mmTotal Width: 0.33in / 8.48mmTotal Height: 0.57in / 14.50mmTotal Weight: 0.035oz / 1.0gShown installed on...

Additional Information - Rear lights for Axial SCX10 III Early Ford BroncoSpecifications:Strong Durable NylonABS Plastic Injection Molding LensesTotal Weight: 0.31oz / 9.0gShown painted Red and installed on Axial SCX10 III Early Ford Bronco with License...

Additional Information - 1/10 Square Light Pods w/MountsSpecifications:ABS Plastic Injection MoldingStainless Steel MountsTotal Length: 0.38in / 9.7mmTotal Width: 0.65in / 16.6mmTotal Height: 0.48in / 12.2mmWeight: 0.09oz / 2.5gShown installed on RC4WD...

Additional Information - Offroad Light Set W/ LED Light Kit for Axial 1/10 SCX10 III Jeep (Gladiator/Wrangler)Specifications:Strong Durable Nylon?�Total Weight: 0.24oz / 7.0gShown installed on Axial 1/10 SCX10 III Jeep JLU Wrangler with Adventure Roof...