FTX Kanyon Body Post Mount Set FTX8472 Front short & Rear tall cross tower RC

Additional Information -

FTX KANYON BODY POST SET

Body Mount / Body Post Set

Body Post Set

FTX8472 - Body Post Set (plastic)

• Plastic body post set designed for the FTX Kanyon.

• Set includes one tall rear body mount and smaller front body mounts, allowing correct bodyshell positioning.

Rear Body Mount Installation

• The rear body post mounts to the rear body bracket / chassis plate - FTX8471.

• Secured using M3 x 10 mm screws - FTX-SBH044.

Front Body Mount Installation

• The front body posts mount to the front body bracket / chassis plate - FTX8470.

• Secured using M4 x 10 mm screws - FTX6526.

Body Bracket to Chassis Installation

• Both front and rear body brackets (FTX8470 / FTX8471) mount to the main frame / chassis.

• Mounted using plastic posts - FTX8481, which accept M3 threaded hardware in one end and measure 6 mm in diameter and 13 mm in length.

• Initial fixing uses M3 x 8 mm screws - FTX6525.

• Brackets are then secured in place with M3 x 10 mm screws - FTX-SBH044.

Bodyshell Fixing

• The bodyshell is secured to the body posts using medium body pins - FTX6550.

• Allows quick bodyshell removal for maintenance or battery access.

Notes

• Body post set, brackets, screws, and body pins are supplied separately unless otherwise stated.

• Ensure all body posts and brackets are aligned before fully tightening to prevent bodyshell stress or cracking.