Cables

Additional Information - ETRONIX DEANS PLUG WITH GRIPS (1 MALE/1 FEMALE)

Additional Information - ETRONIX 10CM 22AWG FUTABA TWISTED EXTENSION WIREEtronix 10cm 22Awg Futaba Twisted Extension Wire

Etronix Deans Male To Tamiya Female Adaptor Plug ET0853 - A small neat way to convert your Tamiya ESC to a Deans connector for using Deans batteries.

Etronix Jst Female Connector To Jr Male Connector ET0805

Etronix Male Micro Balance Connector With 10Cm 20Awg Silicone Wire ET0630

Additional Information - Etronix 30cm 22Awg Jr Straight Servo Wire

Additional Information - Wire Accessory Pack For Winch and Controllers (3")This is a shortened wire pack for the Warn winch and winch controllers. This will allow you to have a shorter wire option over stock wires to accommodate your custom build. This...

Additional Information - Fastrax 6.4mm X 10cm Heatshrink Red & Black (4) FAST97 - Two of each colour.These can be cut with scissors or a knife and simply shrunk into place, over a connector or solder joint, using the head from a candle, lighter or heat...

Additional Information - ETRONIX XT-60 CONNECTOR (MALE/FEMALE)

Etronix Ec5 5Mm Gold Connectors (Male/Female) ET0608

Additional Information - ETRONIX MALE TAMIYA TO FEMALE EC3 ADAPTOR Male Tamiya (as fitted to a ESC) and Female EC3 (as fitted to an battery) 14 AWG Cable. 100mm long.

Additional Information - Y Harness with XT60 LeadsSpecifications:Black and Red Silica Wire1x XT60 Male Connector2x XT60 Female ConnectorsWire OD: 0.11in / 3.0mmTotal Length: 13.9in / 355mmWeight: 1.05oz / 30gWhat's Included:1x Y Harness with XT60 Leads

Additional Information - ETRONIX 15CM 22AWG FUTABA TWISTED EXTENSION WIREEtronix 15cm 22Awg Futaba Twisted Extension Wire

Additional Information - ETRONIX MALE DEANS TO TWO 4.0MM MALE CONNECTOR ADAPTER Male Danes (as fitted to a ESC) and Two 4mm male bullet connector (as fitted to hard pack batteries) 14 AWG Cable. 130mm long.

Additional Information - Y Harness with XT60 Connectors for Light BarsNow offering easy plug and play wiring of your RC4WD Light Bars to any project.Specifications:Black and Red Silica Wire1x XT60 Male Connector1x XT60 Female Connector1x Futaba Female...

Additional Information - DO NOT USE WITH AIRSOFT as polarity does not match ETRONIX MALE MICRO TAMIYA TO FEMALE DEANS ADAPTOR Etronix Male Micro Tamiya To Female Deans Adaptor Wiring The usual wiring has the positive (red) wire running to the terminal...

Additional Information - ETRONIX JST FEMALE CONNECTOR TO FUTABA MALE CONNECTOREtronix Jst Female Connector To Futaba Male Connector

Additional Information - ETRONIX XT-90 CONNECTOR (MALE/FEMALE)

Additional Information - ETRONIX EC5 CHARGING CABLE This cable is used to charge batteries with EC5 Female connectors. This fits to a charger using 4mm Bullet connectors and terminated in a male EC5 connector.

Additional Information - ETRONIX JST FEMALE CONNECTOR TO DEANS FEMALE PLUGEtronix Jst Female Connector To Deans Female Plug

Additional Information - Futaba has a locating tab on the side and JR has rounded corners. These designs are to avoid reverse connection. With modification that can be interchanged. Etronix Futaba 3 Lead Switch Harness ET0779 This three lead switch can...

DO NOT USE WITH AIRSOFT as polarity does not match Etronix Female Tamiya Block To Male Micro Tamiya Adaptor ET0821 - to convert an ESC large Tamiya plug to take a batter fitted with a Micro Tamiya connector, e.g. Carisma or Voltz Hobby Engine batteries...

Etronix Male Deans Plug With 10Cm 14Awg Silicone Wire ET0620

Etronix 3.0Mm Gold Connectors (2Pr) ET0610

Additional Information - Etronix Balance Adaptor For Saddle Pack LiPo 2S With Deans/4mm Connector

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX XT60 CHARGING CABLECable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya,...

Additional Information - Futaba has a locating tab on the side and JR has rounded corners. These designs are to avoid reverse connection. With modification that can be interchanged.ETRONIX BIND PLUG ET0785Etronix Universal Bind Plug JR style that will...

Additional Information - ETRONIX 12AWG SILICONE WIRE YELLOW (100CM)The smaller the AWG number the larger Amps and Volts the wire can handle.Approximate conversion to metric dimensions:12 AWG = 2.64mm14 AWG = 2.03mm16 AWG = 1.63mm

Additional Information - ETRONIX 12AWG SILICONE WIRE ORANGE (100CM)The smaller the AWG number the larger Amps and Volts the wire can handle.Approximate conversion to metric dimensions:12 AWG = 2.64mm14 AWG = 2.03mm16 AWG = 1.63mm

Additional Information - ETRONIX 12AWG SILICONE WIRE BLUE (100CM)The smaller the AWG number the larger Amps and Volts the wire can handle.Approximate conversion to metric dimensions:12 AWG = 2.64mm14 AWG = 2.03mm16 AWG = 1.63mm

Additional Information - ETRONIX 30CM 22AWG FUTABA TWISTED EXTENSION WIREEtronix 30cm 22Awg Futaba Twisted Extension Wire

Additional Information - ETRONIX LOW PROFILE 4.0MM MALE GOLD CONNECTOR (2) FOR RIGHT ANGLE

Etronix Futaba Female Connector To Tamiya Connector ET0800

Etronix Ec3 3.5Mm Connector ET0601

Additional Information - Supplied one Red and One black plug, two in total.Etronix 4.0mm Gold Connector Red & Black ET0600 Supplied one Red and One black plug, two in total, both male ends.

Additional Information - Etronix Micro FTX Connectors Only Male & Female ET0799This packet includes one male and one female micro Tamiya connector plug as used on the FTX micro.If you are looking for standard sized connectors search ET0795If you are...

Additional Information - Etronix Tamiya 2S Battery Harness For 2 Packs In Series Adaptor ET0711This cable is for connectiong two 2S batteries in series. Two male Tamiya connectors, that connect to the battery packs, lead to one Female Tamiya plug for...

Additional Information - Etronix 3.5mm Gold Connector w/ Housing ET0603This includes once connection that has one male and one female 3.5mm bullet solder connection.

Additional Information - Etronix Balancer Adaptor For Lipo 2S With Deans 4mm 2mm Connector ET0282This has a female deans connector to plug into an ESC and on the other end of the 10cm cable are two 4mm bullet / Bannana terminals and one 2mm that connecto...