Bumpers Fenders Rock Sliders

Additional Information - Tow Bar Mount for TF2 / G2Specifications:CNC Machined Billet AluminumLength: 3.97in / 101mmWidth: 0.64in / 16.3mmHeight: 0.87in / 22.2mm Mount to Mount Width: 3.22in / 82mmWeight: 0.81oz / 23gShown installed on RC4WD Trail Finder...

Additional Information - These are 72mm on the inside of the chassis rails surface, so did slide in ok on the SCX10. Holes nearly line up, you may just need to widen those on the chassis a little. Note that this sticker out further than the stock mount...

Additional Information - RC4WD Marlin Crawler Side Plastic Sliders for TF2 LWB These new RC4WD Marlin Crawler Plastic Side Sliders for the Trail Finder 2 LWB are designed to fit your truck perfectly! They have been Officially Licensed by Marlin Crawler...

Additional Information - Tough Armor front Bumper for G2 CruiserSpecifications:Heavy Duty Steel and Aluminum ConstructionHand Welded BumperPowder CoatedCorrosion ResistantBuilt-in Tow Shackle MountsLength: 2.32in / 59mmWidth: 6.65in / 169mmHeight: 2.24in...

Trailer Hitch for Axial Yeti 1/10 & Trophy TruckSpecifications:CNC MachinedBillet AluminumBlack Anodized Finish Total Length: 2.53in / 64.2mm  Total Width: 1.02in / 26.0mm Total Height: 1.21in / 30.8mm Weight: 1.30oz / 33g Manufactured...

Additional Information - Universal Bumper Mounts to fit Trail Finder 2Specifications:CNC MachinedShort VersionBlack PowdercoatedWeight: 0.7oz / 20gShown with bumper part number (Z-S0997) (Not Included)Shown mounted on RC4WD Trail Finder 2 Truck Kit...

Additional Information - Tough Armor Front Light Bar Bumper for Axial SCX10 (Ver 2)Tough Armor Front Light Bar Bumper adds a touch of attitude and style to your trucks front end! Specifications:Heavy Duty Steel TubeHand WeldedBlack Powder Coated...

Additional Information - Gelande 2 Rear Replacement BumperSpecifications: CNC MachinedSmooth Black Anodized FinishShown on the Gelande 2 for example (Not Included)What's Included:1x Gelande 2 Rear Replacement BumperOptional Parts:Rear Bumper Mounts For...

Additional Information - RC4WD Push Bar for RC4WD Chevy K5 Front BumperSpecifications:CNC Machined Billet Aluminum Polished FinishTotal Length: 3.12in / 79.27mmTotal Width: 2.79in / 70.94mmWeight: 0.65oz / 18.6gShown installed on RC4WD Trail Finder 2...

RC4WD 1/10 Monster Hooks Forged MH-4 Hitch Hook w/LatchRC4WD has teamed up with Monster Hooks to bring you this Monster Hooks Forged Hook. This partnership will allow RC4WD to bring many new scale items to the RC market. Monster Hooks is well known for...

Additional Information - AX80044 1SCX10 Tube Front Bumper Parts TreeDesigned to easily fit onto your SCX10 chassis. Giving the ultimate scale look. You may also want to consider a rear bumper also. This is a replacement for those fitted to the Honcho. It...

Additional Information - AX30530 Front Aluminium Skid Plate set for Tube Front BumperDesigned to easily fit onto your SCX10 chassis. Giving the ultimate scale look. You may also want to consider a rear bumper. This is a replacement for those fitted to...

Additional Information - Universal Front Bumper Mount for Trail Finder 2Specifications:CNC MachinedTotal Width: 3.39in / 86.1mmTotal Length: 0.61in / 15.5mmTotal Height: 0.87in / 22.2mmMount to Mount Width: 1.53in / 39mmWeight: 0.59oz / 17gShown...

Additional Information - RC4WD Chevrolet Blazer Chrome Grill and Bumper Parts TreeSpecifications:Injection Molded PlasticChrome PlatedWeight: 5.1oz / 144gShown installed with RC4WD Chevrolet Blazer Hard Body Complete Set (Z-B0092) and RC4WD Trail Finder...

Additional Information - Aluminum Tube Front Fender with Body Panel for Axial Jeep Rubicon (Silver)Specifications:CNC Machined AluminumAnodized Silver FinishEach Weight: 1.7oz / 48gShown with Axial Jeep Rubicon for example (Not Included)What's...

Additional Information - Nylock Nuts M4 (Black)What's Included:10x Nylock Nut M4 (Black)Notes:Uses RC4WD 7.0mm Metric Nut Driver ToolRC4WD 7.0mm Replacement Nut Driver Tip

Additional Information - Blade Snow Plow Mounting kit for Axial SCX10These will allow you to mount the RC4WD Blade Snow Plow unit to your SCX10 chassis trucks. Specifications:CNC MachinedDirect fit for SCX10 Series TrucksEasy InstallationCombined Weigh:...

Additional Information - RC4WD Tough Armor Side BarsTough Armor sidebars are built for protection of the side body panel without sacrificing ground clearance.Specifications:Heavy Duty Steel TubeHand WeldedIndustrial-strength powder-coated finish for long...

Additional Information - Blade Snow Plow Mounting kit for Vaterra AscenderThese will allow you to mount the RC4WD Blade Snow Plow unit to your Vaterra Ascender truck. Specifications:CNC MachinedDirect fit for Vaterra AscenderBillet AluminumEasy...

Additional Information - Black version search Z-B0039. These now occlude the extra handles for the 4 door body (2024).RC4WD Mojave II Chrome Bumper and Parts TreeSpecifications:Injection Molded PlasticChrome Plated FinishRequires AssemblyWeight: 1.48oz /...

Additional Information - RC4WD Adjustable Drop Hitch (Short)Specifications:CNC MachinedAdjustableWeight: 0.56oz / 16gShown with Survivor Rear Bumper for Gelande (Z-S0698) and RC4WD Gelande II Truck Kit w/D90 Body Set (Z-K0001) and BigDog 1/8 Dual Axle...

Additional Information - RC4WD Adjustable Drop Hitch (Long)Specifications:CNC MachinedAdjustableWeight: 0.45oz / 13gShown with Tough Armor Rear Bumper for Trail Finder 2 w/Hitch Mount (Z-S0579) and RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set...

Additional Information - RC4WD Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 JeepThis is the all new Licensed Rock Hard 4x4 Full Width Front Bumper. This has been Officially Licensed by the Rock Hard 4x4 company and are only available from...

Additional Information - Diameter 8mm length 45mm.Universal Bumper Mounts to fit Trail Finder 2Specifications:CNC MachinedLong VersionBlack PowdercoatedEach Weigh: 0.14oz / 4gShown with RC4WD Rampage Recovery Rear Bumper with Swing Away Tire Carrier...

Additional Information - Universal Front Bumper Mounts to fit Axial SCX10Specifications:CNC MachinedBlack PowdercoatedWeight: 0.74oz / 21gShown with RC4WD Rampage Front Recovery Bumper (Z-S0997) for example (Not Included)Shown mounted on SCX10 Trucks for...

Additional Information - Tough Armor Front Light Bar Bumper for Axial SCX10 (Ver 1)Tough Armor Front Light Bar Bumper adds a touch of attitude and style to your trucks front end! Specifications:Heavy Duty Steel Tube Hand Welded Black powder-coated...

Additional Information - Gelande 2 Front Replacement BumperSpecifications:CNC MachinedSmooth Black Anodized FinishShown on the Gelande 2 for example (Not Included)What's Included:1x Gelande 2 Front Replacement Bumper

Additional Information - King Kong Tow Shackle (Orange)Heavy Duty and Extremely Scale Tow Shackle!Specifications:Heavy Duty SteelFit RC4WD HookTotal Width: 0.51in / 12.80mmTotal Length: 0.78in / 19.72mmInner Wall Maximum Width: 0.24in / 6.08mmInner Wall...

Additional Information - RC4WD Viking 1/10 Aluminum Winch FairleadThe new Viking Offroad Fairlead is all you need to top of your scale build. It is a replica of the 350 Series offered by Viking. The Fairlead is CNC machined aluminum with a smooth...

Axial SCX10 Poison Spyder JK Crusher Flares (Front) Check out Axial's officially licensed Poison Spyder Customs Crusher Flares. These molded plastic tube front fender flares add style and function to any scale off-road vehicle. Great...

Additional Information - Axial SCX10 Poison Spyder JK Crusher Flares (Rear) Check out Axial?s officially licensed Poison Spyder Customs Crusher Flares. These molded plastic tube front fender flares add style and function to any scale...

Additional Information - Axial SCX10 Poison Spyder JK Brawler Lite Front BumperCheck out Axial���s officially licensed Poison Spyder Customs Brawler Lite bumper. This small scale version was designed specifically for the SCX10 as a high clearance bumper...

img{max-width:100%} Axial SCX10 Poison Spyder JK RockBrawler Rear Bumper and Tyre CarrierCheck out Axial's officially licensed Poison Spyder Customs RockBrawler rear bumper. This small scale version was designed specifically for the SCX10 as a high...

Additional Information - AX80039A 1/10th Scale Front Plate Bumper Set Designed to easily fit onto your SCX10 chassis. Giving the ultimate scale look. You may also want to consider a rear bumper also. Our kit includes - Chassis mount - simply remove...

Additional Information - img{max-width:100%} Bempers / Fenders Front and Rear for 1/10 Land Rover Defender D90 Hard Plastic Body Front and rear bumpers including Mud Flaps. You may want to purchase the Complete Body that includes all items. Hard Black...

Additional Information - #3 Aluminum Bumper Mount For Trail Finder 2 This is a aluminum upgrade to the plastic bumper mounts found in the Trail Finder 2 kit. Specifications: CNC Machined Smooth Black Anodized Finish Direct fit for TF2 Chassis ...

Additional Information - # 2 Aluminum Bumper Mount for Trail Finder 2 This is a aluminum upgrade to the plastic bumper mounts found in the Trail Finder 2 kit. Specifications: CNC Machined Smooth Black Anodized Finish Direct fit for TF2 Chassis ...

Additional Information - #1 Aluminum Bumper Mount For Trail Finder 2 This is a aluminum upgrade to the plastic bumper mounts found in the Trail Finder 2 kit. Specifications: CNC Machined Smooth Black Anodized Finish Direct fit for TF2...

Additional Information - King Kong Mini Tow Shackle Now even smaller. Heavy duty and more scale! Specifications: Heavy duty steel Fit RC4WD Small Scale Hook 1/10 scale Shown below with Z-S0674 for example (Not included) Shown...

Additional Information - 1x King Kong Tow ShackleHeavy Duty and Extremely Scale Tow Shackle! Specifications:Heavy Duty SteelFit RC4WD Hook1/10 ScaleShown installed on our Winch: What's Included:1x KK Tow Shackle Optional Parts:Tough Armor Winch Bumper...