Bumpers Fenders Rock Sliders

Additional Information - Size- Base 12.5 x 14mm with hole centres at 8mm and 9mmKing Kong Mini Tow Shackle with Mounting Bracket Heavy duty and extremely scale tow shackle! Specification: Heavy Duty SteelFits...

Additional Information - Big Boss Fender Flare Set for D90/D110This RC4WD Big Boss Fender Flare Set for D90/D110 will provide ultimate protection for your body while allowing you to run a much wider footprint, giving you more traction control! No other...

Additional Information - RC4WD Marlin Crawler Front Plastic Tube Bumper for Trail Finder 2This is now Licensed Marlin Crawler Front Plastic Tube Bumper for the Trail Finder 2. This has been Officially Licensed by the Marlin Crawler Inc and are only...

Additional Information - Tough Armor Front Tube Bumper w/Winch Mount for Trail Finder 2Tough Armor Winch Bumper add a touch of attitude and style to your truck front end! Versatility to hold auxiliary lighting or a winch. Stop low-speed impacts from...

Additional Information - Tough Armor Side Steel Sliders for Axial SCX10Specifications: Heavy Duty Steel TubeHand WeldedIndustrial-strength powder-coated finish for long life and rugged good looksCorrosion resistantBlack powder-coated...

Additional Information - Tough Armor Double Tube Sliders for C2X Specifications: Heavy Duty Steel Tube Black Powder-coated Finish Length: 6.85in / 174.0mm Width: 1.98in / 50.3mm Height: 0.87in / 22.1mm Weight: 4.76oz / 135.0g Shown...

Additional Information - Requires RC4WD Aluminum Front Bumper Mount Conversion for Traxxas TRX-4 (Z-S1840)Tough Armor Attack Front Bumper for Traxxas TRX-4Specifications:Heavy Duty Stamped SteelHand WeldedBlack Powder-coated FinishLength: 8.50in / 216...

Additional Information - Axial SCX10 Poison Spyder JK Crusher Flares (Rear) Check out Axial?s officially licensed Poison Spyder Customs Crusher Flares. These molded plastic tube front fender flares add style and function to any scale...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.Tough Armor Tube Winch Bumper for 1985 Toyota 4RunnerSpecifications:Heavy Duty Steel TubeHand WeldedBlack Powder-coated FinishLength: 7.58in / 192.7mmWidth: 1...

Additional Information - Tough Armor Rear Tube Bumper w/Hitch Mount for Trail Finder 2Specifications: Heavy Duty Steel Tube Hand Welded Industrial-strength powder-coated finish Width: 1.88in / 47.98mm Length:7.22in / 183.40mmHeight: 1.05in / 26...

Additional Information - Tough Armor Front Winch Bumper for Axial SCX10 II (Type A)Specifications:CNC MachinedHand Welded Billet Aluminum and Stainless Steel Black Powder-coated FinishTotal Length: 5.51in / 140.0mmTotal Width: 2.56in / 65.08mmTotal...

Additional Information - AX80044 1SCX10 Tube Front Bumper Parts TreeDesigned to easily fit onto your SCX10 chassis. Giving the ultimate scale look. You may also want to consider a rear bumper also. This is a replacement for those fitted to the Honcho. It...

Additional Information - Universal Front Bumper Mount for Trail Finder 2Specifications:CNC MachinedTotal Width: 3.39in / 86.1mmTotal Length: 0.61in / 15.5mmTotal Height: 0.87in / 22.2mmMount to Mount Width: 1.53in / 39mmWeight: 0.59oz / 17gShown...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.RC4WD Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 JeepThis is the all new Licensed Rock Hard 4x4 Full Width Front Bumper. This has been Officially...

Additional Information - Universal Front Bumper Mounts to fit Axial SCX10Specifications:CNC MachinedBlack PowdercoatedWeight: 0.74oz / 21gShown with RC4WD Rampage Front Recovery Bumper (Z-S0997) for example (Not Included)Shown mounted on SCX10 Trucks for...

Additional Information - RC4WD Tough Armor Double Steel Tube Front Bumper for Trail Finder 2 Specifications: Heavy Duty Steel Tube Hand Welded Black Powder Coated Finish 3D Printed Resin Length: 7.32in / 186mm Width: 0.71in / 18.1mm Height: 1...

Additional Information - Tough Armor High Clearance Winch BumperSpecifications:Billet AluminumCNC MachinedBlack Anodized FinishLength: 6.69in / 170mmWidth: 2.00in / 50.8mmHeight: 0.97in / 24.8mmWeight: 5.00oz / 142gShown installed on RC4WD C2X Class 2...

Additional Information - Tough Armor Stubby Front Winch Bumper for TRX-4Specifications: Heavy Duty Stamped SteelHand WeldedBlack Powder-coated FinishLength: 3.03in / 77.1mmWidth: 3.17in / 80.6mmHeight: 1.51in / 38.5mmTotal Weight: 2.58oz / 73.4gShown...

Additional Information - Also fits RC4WD Trail Finder 2 LWB with 1987 Toyota XTRAcab Bodyset Z-RTR0057Additional information: Also fits RC4WD Trail Finder 2 LWB with 1987 Toyota XTRAcab Bodyset Z-RTR0057 Tough Armor Narrow Steel Sliders for Trail Finder...

Additional Information - Tough Armor Rear Bumper with Hitch Mount for Chevy Blazer / TF2Specifications:CNC MachinedBillet Aluminum Black Anodized Finish Width: 0.87in / 22.1mmLength:8.78in / 223.0mmHeight: 0.98in / 25.0mmWeight: 4.67oz / 132.5g...

Additional Information - Nylock Nuts M4 (Black)What's Included:10x Nylock Nut M4 (Black)Notes:Uses RC4WD 7.0mm Metric Nut Driver ToolRC4WD 7.0mm Replacement Nut Driver Tip

Additional Information - RC4WD Marlin Crawler Side Plastic Sliders for Trail Finder 2 These are now Licensed Marlin Crawler Plastic Side Sliders for the Trail Finder 2. This has been Officially Licensed by the Marlin Crawler Inc and are only available...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck. CNC Rear Bumper for 1985 Toyota 4Runner   Specifications: CNC Machined Billet Aluminum Black Anodized Finish Length: 7.40in / 188mm Width: 2.70in /...

Additional Information - RC4WD Rampage Front Recovery BumperBrand New and Licensed by Rampage Products. The Rampage Front Recovery Bumper will work with Axial SCX10 Chassis trucks, or Trail Finder 2. These have been Officially Licensed by the Rampage...

Additional Information - Requires RC4WD Aluminum Front Bumper Mount Conversion for Traxxas TRX-4 (Z-S1840)Tough Armor Bumper for Traxxas TRX-4 (Black)Specifications:CNC MachinedBillet AluminumBlack Anodized FinishLength: 8.43in / 214.2mmWidth: 0.81in /...

Additional Information - Requires RC4WD Aluminum Rear Bumper Mount Conversion for Traxxas TRX-4 (Z-S1842)Tough Armor Rear Bumper for Traxxas TRX-4 (Gunmetal)Specifications:CNC MachinedBillet AluminumGunmetal Anodized FinishLength: 7.87in / 200.0mmWidth:...

Additional Information - Requires RC4WD Aluminum Rear Bumper Mount Conversion for Traxxas TRX-4 (Z-S1842)Tough Armor Rear Bumper for Traxxas TRX-4 (Black)Specifications:CNC MachinedBillet AluminumBlack Anodized FinishLength: 7.87in / 200.0mmWidth: 2.50in...

Additional Information - Tough Armor Slim-Line CNC Sliders for Traxxas TRX-4 (Black)Specifications:Billet Aluminum CNC MachinedBlack Anodized FinishWidth: 1.79in / 45.7mmLength: 6.29in / 160.0mmHeight: 1.09in / 27.9mmTotal Weight: 3.33oz / 94.5gShown...

Additional Information - RC4WD Type B Machine Front Winch Bumper for TF2Specifications:Heavy Duty Steel TubeHand WeldedBillet AluminumCNC MachinedBlack Powder-coated FinishCorrosion Resistant Length: 6.93in / 176.0mmHeight: 2.29in / 58.1mmWidth: 2.55in...

Additional Information - Tough Armor Front Light Bar Bumper for Axial SCX10 (Ver 1)Tough Armor Front Light Bar Bumper adds a touch of attitude and style to your trucks front end! Specifications:Heavy Duty Steel Tube Hand Welded Black powder-coated...

Additional Information - Tough Armor Front Light Bar Bumper for Trail Finder 2 Specifications: Heavy Duty Steel Tube Hand Welded Black powder-coated finish Corrosion resistant Adjustable design for many bodies Width: 5.73in / 145.8mmHeight: 0.92in /...

Additional Information - Steel Push Bar Front Bumper for RC4WD Gelande II 2015 Land Rover Defender D90Specifications:Stainless SteelHand WeldedBlack Powder-coated FinishLength: 3.47in / 88.2mmHeight: 2.45in / 62.4mmWeight: 1.88oz / 53.5gShown installed...

Additional Information - RC4WD Marlin Crawler Side Plastic Sliders for 1/24 Trail Finder 2This is new Licensed RC4WD Marlin Crawler Side Plastic Sliders for 1/24 Trail Finder 2. This has been Officially Licensed by the Marlin Crawler Inc and are only...

Additional Information - Double Steel Tube Front Bumper (1987 XtraCab / 1985 4Runner)Specifications:Heavy Duty Steel TubeBlack Powder Coated Finish Bumper CNC Machined Billet Aluminum Mount with Black Anodized FinishLength: 8.22in / 209mmWidth: 1.51in /...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.RC4WD Bull Bar (1985 Toyota 4Runner/1987 Toyota XtraCab/Mojave II) (Black)Specifications:Billet AluminumCNC MachinedBlack Anodized Finish�?�Length: 3.30in /...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.RC4WD Tough Armor Headache Rack for 1985 Toyota 4Runner Hard BodySpecifications:Heavy Duty Steel TubeBlack Powder-coated FinishLength: 5.78in / 147.0mmWidth: 3...

Additional Information - Requires RC4WD Aluminum Rear Bumper Mount Conversion for Traxxas TRX-4 (Z-S1842)Tough Armor Attack Rear Bumper for TRX-4Specifications:CNC MachinedBillet AluminumBlack Powder-coated FinishLength: 8.46in / 215.0mmWidth: 2.11in /...

Additional Information - Tough Armor Tube Roll Bar w/Rear Tire Mount for Chevy BlazerSpecifications:Heavy Duty Steel TubeHand WeldedBlack Powder-coated FinishLength: 7.10in / 180.4mmWidth: 6.85in / 174.0mmHeight: 3.93in / 99.8mmWeight: 10.42oz / 295...

Additional Information - RC4WD Type A Machined Rear Bumper for SCX10 IISpecifications: CNC MachinedBillet Aluminum Black Powder-coated FinishTotal Length: 8.15in / 207.0mmTotal Width: 0.94in / 23.90mmTotal Height: 0.81in / 20.52mmTotal Weight: 4.25oz /...

Additional Information - Axial SCX10 Poison Spyder JK Brawler Lite Front BumperCheck out Axial���s officially licensed Poison Spyder Customs Brawler Lite bumper. This small scale version was designed specifically for the SCX10 as a high clearance bumper...