Hardware Nuts & Bolts

Additional Information - Stainless Steel 0.3mm Spacers AssortmentSpecifications:Stainless SteelWidth: 0.01in / 0.3mmSpacer Size: M2, M3, M4, M5, M10Weight: 0.41oz / 11.7gWhat's Included:1x Stainless Steel 0.3mm Spacers AssortmentOptional...

Additional Information - RC4WD 1/24 Trail Finder 2 Maintenance KitWhat's Included:2x Driveshaft Pins2x Wheel Pins2x Driveshaft O-Rings1x Battery O-Ring Hold DownNotes:Fits RC4WD 1/24 Trail Finder 2 RTR W/ Mojave II Hard Body Set (Yellow) (Z-RTR0051)Fits...

Additional Information - End for the link is M4 and metal ball end is M3.End for the link is M4 and metal ball end is M3. Bent M3/M4 Plastic Rod Ends Specifications: Plastic Body and Steel Ball Shaft Diameter: 0.27in / 7.0mm Head Diameter: 0.38in /...

Additional Information - Uses a 4mm driver to fit. 6mm tall and the flange is 5.5mm diameter.M2 Flanged Acorn Nuts (Silver)Specifications:Stainless SteelCNC Machined Polished FinishWeight: 0.35oz / 10.0gShown installed with Stamped Steel 1.55" Stock...

Additional Information - Uses a 5mm driver to fit. 6mm tall and the flange is 7mm diameter.M2.5 Flanged Acorn Nuts (Silver)Specifications:Stainless Steel Uses a 5mm driver to fit. 6mm tall and the flange is 7mm diameter.CNC Machined Polished...

Additional Information - Uses a 5.5mm driver to fit. 7mm tall and the flange is 7.5mm diameter.M3 Flanged Acorn Nuts (Silver)Specifications:Stainless Steel Uses a 5.5mm driver to fit. 7mm tall and the flange is 7.5mm diameter.CNC Machined Polished...

Rebuild Kit for Wraith XVDSpecifications:CNC Machined Heat Treated SteelWhat's Included:2x Wraith XVD Pins2x Wraith XVD Collar

Additional Information - Universal Bumper Mounts to fit Trail Finder 2Specifications:CNC MachinedShort VersionBlack PowdercoatedWeight: 0.7oz / 20gShown with bumper part number (Z-S0997) (Not Included)Shown mounted on RC4WD Trail Finder 2 Truck Kit...

Additional Information - Replacement Hitch Clip and Spring for BigDog TrailersSpecifications:Clip:Length: 0.39in / 10mmID: 0.25in / 6.4mmSlot: 0.14in / 3.5mmOD: 0.38in / 9.6mmSpring:Length: 0.52in / 13.2mmOD: 0.31in / 8mmID: 0.26in / 6.6mmShown installed...

Additional Information - Pins are 10mm x 2mm M24x RC4WD 12mm Axle Wheel HexesHere are the replacement wheel hexes for many axles. These will fit most axles on the market. (please see photo to confirm)Specifications:Hex Material: SteelPin Material:...

Additional Information - Replacement Hardware for Rear Yota II AxleSpecifications:5x M2x10mm SHCS (Black) 5x M2x8mm SHCS (Black)11x M2x5mm SHCS (Black)5x M3x8mm BHCS (Black)What's Included:1x Replacement Hardware for Rear Yota II Axle

Additional Information - Ball Hitch M3 x 6mmSpecifications:Head Diameter: 0.16in / 4.3mmWeight: 0.45oz / 13gWhat's Included:10x Ball Hitch M3 x 6mm (Black)

Additional Information - Total length 33mm, Fit hole 19mm, second hole 23mm.Heavy Duty Metal Servo Arm 24t HitecSpecifications: CNC Machined Aluminum24t Splines for Hitec Style Servos Weight: 0.1oz / 3g Photo...

Additional Information - Ultra Scale Hardened Steel Driveshaft Hardware & WrenchSpecifications:Steel constructionWhat's Included:10x M1 x 4mm Hex Head Bolts10x M1 Nuts1x Wrench

Additional Information - Replacement Screws for Losi Micro Crawler Beadlock Wheels (M2 X 6mm)These screws are replacement for Micro Losi Beadlock Wheels. What's Included: 32x M2 x 6mm Silver Replacement Screws Notes: Fits Z-W0061 wheels...

Additional Information - Ever had a wheel nut come loose on the trail? Not fun, and it can leave you out of commission for the rest of the day. Axial’s M4 Serrated Wheel Nuts help eliminate this problem when you are deep in the woods. The one-way...

Additional Information - • Genuine Axial ball bearings are manufactured with high quality components for long life• Steel construction for durability• Provides less rolling resistance and more precision than bushings

Additional Information - • 5 x 6.9 x 4.8mm transmission spacer• CNC machined aluminum• Grey anodize

Additional Information - Replacement Shock Shafts for King Shocks (110mm)What's Included:2x Replacement Shock Shafts for King Shocks (110mm)Optional Parts:RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (110mm) (Z-D0030)

Additional Information - Adjustable Heavy Duty Metal Servo Arm for Futaba Type ServoCustom made for Futaba type of servo. Such as Z-E0035 servo.Specifications:Heavy Duty Aluminum MaterialCompact light weight designWhat's Included:1x RC4WD Adjustable...

Additional Information - Miniature Scale Hex Bolt Tool for M1.6 Scale Bolts (1.5 mm Hex)These are the hex tools for the RC4WD miniature Hex Head Scale BoltsSpecifications:Length: 0.23in / 6mmOD: 0.1in / 2.5mmWhat's Included:2x Miniature Scale Hex Bolt...

Additional Information - Shock Ball End for Bottom of Rock Krawler RRD ShockSpecifications:CNC Machined AluminumSmooth Black Anodized Finish Total Weight: 0.14oz / 4gShown installed on RC4WD Rock Krawler RRD Emulsion Scale Dual Spring Shocks (100mm)...

Additional Information - Lower, Center and Threaded Spring Retainer for Rock Krawler RRD ShocksSpecifications: CNC Machined AluminumEnough for 2 ShocksTotal Weight: 0.24oz / 7gShown installed on RC4WD Rock Krawler RRD Emulsion Scale Dual Spring Shocks...

Additional Information - RC4WD Shock Cap for Top of Rock Krawler RRD ShocksSpecifications:CNC Machined AluminumSmooth Black AnodizedRock Krawler LogoTotal Weight:0.24oz / 7gShown installed on RC4WD Rock Krawler RRD Emulsion Scale Dual Spring Shocks...

Additional Information - Lower Spring Retainer for Dual Spring Ver 2 Shocks Specifications: CNC MachinedWeight: 0.1oz/3gWhat's Included:2x Lower Spring Retainer for Dual Spring Ver 2 Shocks Notes:These are replacement lower spring retainers for...

Additional Information - Sizes ID is 9mm and them OD is 11 & 12mm due to the step.Center Spring Retainer for Dual Spring Ver 2 Shocks Specifications:CNC Machined Weight: 0.1oz/3gWhat's Included:2x Center Spring Retainer for Dual Spring Ver 2 Shocks...

Additional Information - M3 Short Bent Plastic Rod End (20x)This rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better. Specifications:Length :21mm / 0...

Additional Information - Mojave II Body Hardware KitSpecifications:Total Weight: 0.63oz / 18gShown installed with RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) for example (Not Included)What's Included:4x M2x6mm SHCS (Black) (Z-S1584)6x...

35mm (1.37") Internally Threaded Aluminum Link (Black) (4)Specifications:Smooth Anodized Coating3mm Female Threading6mm Outside Diameter35mm (1.37") End to EndLaser Etched Size Listed on LinkWhat's Included:4x 35mm (1.37") Internally Threaded Aluminum...

20mm (0.78") Internally Threaded Aluminum Link (Black) (4)Specifications:Smooth Anodized Coating 3mm Female Threading 6mm Outside Diameter 20mm (0.78") End to EndLaser Etched Size Listed on LinkWhat's Included:4x 20mm (0.78") Internally...

Additional Information - 10mm (0.39") Internally Threaded Aluminum Link (Black) (4)Specifications: Smooth Anodized Coating 3mm Female Threading 6mm Outside Diameter 10mm (0.39") End to End Laser Etched Size Listed on Link What's Included: 4x 10mm (0...

Additional Information - M3 Offset Short Plastic Rod End (20x)This rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better. Specifications:Length: 20mm /...

Additional Information - M3 Straight Medium Length Plastic Rod End (20x)This rod end is an all new advanced plastic compound from RC4WD. These are a much better product than our previous material and will hold a great deal better. ...

Additional Information - Pins are 10mm x 2mm M24x RC4WD 12mm Axle Wheel Hex SetHere are the replacement wheel hexes for many popular RC4WD axles. These fit on most axles except the Bully line. (Please see the photos to help confirm)Specifications:12mm...

Additional Information - Universal Front Bumper Mounts to fit Axial SCX10Specifications:CNC MachinedBlack PowdercoatedWeight: 0.74oz / 21gShown with RC4WD Rampage Front Recovery Bumper (Z-S0997) for example (Not Included)Shown mounted on SCX10 Trucks for...

Additional Information - Rebuild Kit for Super Punisher ShaftsEasily rebuild your Super Punisher Shafts with this rebuild kit. Specifications:Material: 9csiWhat's Included:2x Pins 4x Hex Set ScrewsOptional Parts:Rebuildable Super Punisher Shaft (121mm -...

Additional Information - Replacement Hardware for Front Yota II AxleSpecifications:M2 x 5mm SHCSM2 x 10mm SHCSM3 x 6mm BHCSM3 x 8mm BHCSIron Bushings (3 x 5.6mm)Iron Bushings (3 x 3.6mm)What's Included:11x M2 x 5mm SHCS (Black)5x M2 x 10mm SHCS (Black)...

Additional Information - Miniature Scale Hex Bolt Tool for M2.5 & M3 Scale Bolts (2.5mm Hex) These are the hex tools for the RC4WD miniature Hex Head Scale Bolts What's Included: 2x Miniature Scale Hex Bolt Tool for M2.5 & M3 Scale...

Additional Information - Miniature Scale Hex Bolt Tool (M2 Hex) This is the tool used to install the RC4WD Miniature Scale Hex Head Bolts. What's Included: 2x Miniature Scale Hex Bolt Tool (M2 Hex)

Additional Information - Replacement Hardware for OEM Steel 2.2 WheelWhat's Included:26x M3 Nuts (Black)26x M3x10mm SHCS (Black)Note: Enough for 4 wheelsClick here to download complete RC4WD wheel comparison list.