Cables

Additional Information - Etronix Male Deans To 4.0mm Connector w/ Housing Adaptor (Not For FMS) ET0718Cable has Male deans on one end and 4mm bullet style connector with housing on the other. The lead is 100mm long without the connectors. I have a few...

Additional Information - Etronix Tamiya Extension Adaptor ET0715Etronix Deans Extension Cable in 14 AWG wire with male on one end and female on the other offering 10cm extension wire excluding connectors.

Additional Information - Etronix Heavy Duty Battery Switch(T Plug) ET0710This 100mm cable has a male Deans connector on one end and female on the other. This allows you add to any deans or t-plug connection giving the function of being able to 'break'...

Additional Information - Etronix EC3 Connector Extension Adaptor ET0703This lead is 100mm long wire, excluding the connectors, with a male and a female EC-3 connector on either end.I have a few options EC3 female to female EC3 ET0703, Micro Tamiya...

Additional Information - Etronix JST In Series Cable ET0702In RC (Radio Control) applications, a JST in series lead, also known as a JST Y-harness or a JST splitter, is used to connect two batteries in series to increase the voltage of the power source,...

Additional Information - Etronix Female Micro Tamiya Connector With 10cm 18AWG Silicone Wire ET0627Cable is 100mm long excluding connector. Cable is also 18 AWG rated cable, (smaller the AWG number the greater amps and voltage it is rated for. 12 AWG is...

Additional Information - Etronix Female Multiplex MPX With 10cm 14AWG Silicone Wire ET0623Etronix Multiplex MPX Green Extension Cable in 14 AWG wire with female on one end and wire termination the other offering 10cm extension wire excluding connectors.I...

Additional Information - Etronix Male Multiplex MPX With 10cm 14AWG Silicone Wire ET0622Etronix Multiplex MPX Green Extension Cable in 14 AWG wire with male on one end and wire termination the other offering 10cm extension wire excluding connectors.I...

Additional Information - Etronix Crocodile Clip/70mm ET0617These are two clips that will take wire upto 6mm either crimmped or soldered connection. One is supplied with black insulation and the other red.I have three options for crocodile connectors /...

Additional Information - Etronix Crocodile Clip/55mm ET0615These are two clips that will take wire upto 4mm either crimmped or soldered connection. One is supplied with black insulation and the other red.I have three options for crocodile connectors /...

Additional Information - Etronix 5.0mm Male Gold Connector (2) ET0611These are an uninsulated solder bullet style connector. Supplied in and packet or two male connectors. I have these available in two sizes 4mm ET0605 and 5mm ET0611.

Additional Information - Etronix 2.0mm Gold Connectors (2Pr) ET0609These are an uninsulated solder bullet style connector. Supplied in and packet or two male and female connectors. I have these available in Three sizes 2mm ET0609 3mm ET0610 and 4mm...

Additional Information - Etronix 4.0mm Gold Connector w/ Housing ET0604Handed 4 mm solder bullet style connetor. Red in colour and 34mm long 17mm wide and 8.5mm thick.I also have these in the smaller connecter with 3.5mm bullets ET0603. Red in colour and...

Additional Information - Etronix Micro FTX Connectors Only Male & Female ET0799This packet includes one male and one female micro Tamiya connector plug as used on the FTX micro.If you are looking for standard sized connectors search ET0795If you are...

Additional Information - Etronix Tamiya 2S Battery Harness For 2 Packs In Series Adaptor ET0711This cable is for connectiong two 2S batteries in series. Two male Tamiya connectors, that connect to the battery packs, lead to one Female Tamiya plug for...

Additional Information - Etronix 3.5mm Gold Connector w/ Housing ET0603 This includes once connection that has one male and one female 3.5mm bullet solder connection. Red in colour and 18.5mm long 15mm wide and 7.2mm thick.  I also have these in...

Additional Information - Etronix Balancer Adaptor For Lipo 2S With Deans 4mm 2mm Connector ET0282This has a female deans connector to plug into an ESC and on the other end of the 10cm cable are two 4mm bullet / Bannana terminals and one 2mm that connecto...

Additional Information - ETRONIX 7-IN-1 CHARGING CABLE Lead / Wire - Etronix 4mm Bullet To Deans/Futaba/JST/TRX/Tamiya/EC3/Diy Extra Wire ET0280 The ultimate charge cable from Etronix the only one you will ever need. Cable is 14 AWG gauge and 35cm...

Additional Information - Etronix 6S 30cm Balance Lead Extension Wire JST-XH ET0250These leads are 300mm long with male and female JST-HX connectors and can be used to extended your balance charger lead, or replace it. They are available in six versions...

Additional Information - Etronix 5S 30cm Balance Lead Extension Wire JST-XH ET0249.These leads are 300mm long with male and female JST-HX connectors and can be used to extended your balance charger lead, or replace it. They are available in six versions...

Additional Information - ETRONIX DEANS 2S BATTERY HARNESS FOR 2 PACKS IN SERIES 14AWG SILICONE WIRE A simple way to connect battery packs. Available in 2 or 3s with Tamiya, Deans or EC3 in Series or Parallel. 3S 3 Packs Series Deans ET0709 2 Packs...

Additional Information - ETRONIX DEANS 2S BATTERY HARNESS FOR 2 PACKS IN SERIES 14AWG SILICONE WIRE A simple way to connect battery packs. Available in 2 or 3s with Tamiya, Deans or EC3 in Series or Parallel. 3S 3 Packs Series Deans ET0709 2 Packs...

Additional Information - ETRONIX DEANS 2S BATTERY HARNESS FOR 2 PACKS IN SERIES 14AWG SILICONE WIRE A simple way to connect battery packs. Available in 2 or 3s with Tamiya, Deans or EC3 in Series or Parallel. 3S 3 Packs Series Deans ET0709 2 Packs...

Additional Information - ETRONIX DEANS EXTENSION CABLEEtronix Deans Extension Cable in 14 AWG wire with male on one end and female on the other offering 10cm extension wire excluding connectors.

Additional Information - ETRONIX JST-Y CABLE Etronix JST-Y Cable splitting one Female JST to two males on a 10cm lead. If you are looking for a JST in Series lead look at ET0702.

Additional Information - ETRONIX JST EXTENSION CABLEEtronix JST Extension Cable with male on one end and female on the other. Cable portion, expluding connectors is 11cm long.

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX DJI PHANTOM CHARGING CABLEEasy connection to charger with 4.0mm Bullet / Bannana plug to Grey DJI. See note attached about charging.

Additional Information - ETRONIX 18-IN-1 CHARGING CABLE Lead / Wire The ultimate charge cable from Etronix the only one you will ever need. Cable is 14 AWG gauge and 35cm long and includes all blanking plugs for those male connectors. Main charger...

Additional Information - ETRONIX MULTIFUNCTIONAL CHARGING CABLE TO JST/CROC/FUTABA/GLOW 5 in 1 4mm Bannana bullet plug to connect to a charger Supplied with Glow ignitor starterm, JST, RX Futaba, and Crocodile. Easy disconnect each style wiat a deans...

Additional Information - ETRONIX MULTIFUNCTIONAL CHARGING CABLE TO JST/CROC/FUTABA/GLOW 4mm Bannana bullet plug to connect to a charger Supplied with Glow ignitor starterm, JST, RX Futaba, and Crocodile. Easy disconnect each style and plugs are market...

Additional Information - ETRONIX BULLET PLUGS CHARGING CABLEEtronix Deans Charging CableCable length is 300mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male...

Additional Information - ETRONIX CROCODILE CLIP CHARGING CABLEEtronix Crocodile Clip Charging CableCable length is 160mm excluding connectors.4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya,...

Additional Information - ETRONIX FUTABA RX CHARGING CABLE Etronix Futaba Rx Charging Cable Cable length is 160mm excluding connectors. 4mm Bannana bullet plug to connect to a charger Avilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya,...

Additional Information - ETRONIX JST CHARGING CABLEEtronix Jst Charging CableCable length is 160mm excluding connectors.4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya, Deans, 4mm Bullet /...

Additional Information - ETRONIX TAMIYA CHARGING CABLEEtronix Tamiya Charging CableEtronix Deans Charging CableCable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a...

Additional Information - ETRONIX EC3 CHARGING CABLEEtronix Ec3 Charging CableEtronix Deans Charging CableCable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in...

Additional Information - ETRONIX DEANS CHARGING CABLEEtronix Deans Charging CableCable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30,...