Cables

Additional Information - Etronix Tamiya 2S Battery Harness For 2 Packs In Series Adaptor ET0711This cable is for connectiong two 2S batteries in series. Two male Tamiya connectors, that connect to the battery packs, lead to one Female Tamiya plug for...

Additional Information - Etronix 3.5mm Gold Connector w/ Housing ET0603This includes once connection that has one male and one female 3.5mm bullet solder connection.

Additional Information - Etronix Balancer Adaptor For Lipo 2S With Deans 4mm 2mm Connector ET0282This has a female deans connector to plug into an ESC and on the other end of the 10cm cable are two 4mm bullet / Bannana terminals and one 2mm that connecto...

Additional Information - ETRONIX 7-IN-1 CHARGING CABLE Lead / Wire - Etronix 4mm Bullet To Deans/Futaba/JST/TRX/Tamiya/EC3/Diy Extra Wire ET0280 The ultimate charge cable from Etronix the only one you will ever need. Cable is 14 AWG gauge and 35cm long...

Additional Information - Etronix 6S 30cm Balance Lead Extension Wire JST-XH ET0250These leads are 300mm long with male and female JST-HX connectors and can be used to extended your balance charger lead, or replace it. They are available in six versions...

Additional Information - Etronix 5S 30cm Balance Lead Extension Wire JST-XH ET0249.These leads are 300mm long with male and female JST-HX connectors and can be used to extended your balance charger lead, or replace it. They are available in six versions...

Additional Information - ETRONIX DEANS 2S BATTERY HARNESS FOR 2 PACKS IN SERIES 14AWG SILICONE WIRE A simple way to connect battery packs. Available in 2 or 3s with Tamiya, Deans or EC3 in Series or Parallel. 3S 3 Packs Series Deans ET0709 2 Packs...

Additional Information - ETRONIX DEANS 2S BATTERY HARNESS FOR 2 PACKS IN SERIES 14AWG SILICONE WIRE A simple way to connect battery packs. Available in 2 or 3s with Tamiya, Deans or EC3 in Series or Parallel. 3S 3 Packs Series Deans ET0709 2 Packs...

Additional Information - ETRONIX DEANS 2S BATTERY HARNESS FOR 2 PACKS IN SERIES 14AWG SILICONE WIRE A simple way to connect battery packs. Available in 2 or 3s with Tamiya, Deans or EC3 in Series or Parallel. 3S 3 Packs Series Deans ET0709 2 Packs...

Additional Information - ETRONIX DEANS EXTENSION CABLEEtronix Deans Extension Cable in 14 AWG wire with male on one end and female on the other offering 10cm extension wire excluding connectors.

Additional Information - ETRONIX JST-Y CABLEEtronix JST-Y Cable splitting one Female JST to two males on a 10cm lead.

Additional Information - ETRONIX JST EXTENSION CABLEEtronix JST Extension Cable with male on one end and female on the other. Cable portion, expluding connectors is 11cm long.

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX BRUSHLESS MOTOR SENSOR WIRE w/BRAID SLEEVING 100MMAvailable in tow lengths lead / wire, 100 mm or 150 mm, and two sleve types, Silicone or Braided.ET0395B 10cm BraidedET0395S 10cm SiliconeET0396B 15cm BraidedET0396S 15cm...

Additional Information - ETRONIX DJI PHANTOM CHARGING CABLEEasy connection to charger with 4.0mm Bullet / Bannana plug to Grey DJI. See note attached about charging.

Additional Information - ETRONIX 18-IN-1 CHARGING CABLE Lead / Wire The ultimate charge cable from Etronix the only one you will ever need. Cable is 14 AWG gauge and 35cm long and includes all blanking plugs for those male connectors. Main charger...

Additional Information - ETRONIX MULTIFUNCTIONAL CHARGING CABLE TO JST/CROC/FUTABA/GLOW 5 in 14mm Bannana bullet plug to connect to a chargerSupplied with Glow ignitor starterm, JST, RX Futaba, and Crocodile.Easy disconnect each style wiat a deans...

Additional Information - ETRONIX MULTIFUNCTIONAL CHARGING CABLE TO JST/CROC/FUTABA/GLOW4mm Bannana bullet plug to connect to a chargerSupplied with Glow ignitor starterm, JST, RX Futaba, and Crocodile.Easy disconnect each style and plugs are market with...

Additional Information - ETRONIX BULLET PLUGS CHARGING CABLEEtronix Deans Charging CableCable length is 300mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male...

Additional Information - ETRONIX CROCODILE CLIP CHARGING CABLEEtronix Crocodile Clip Charging CableCable length is 160mm excluding connectors.4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya,...

Additional Information - ETRONIX FUTABA RX CHARGING CABLEEtronix Futaba Rx Charging CableCable length is 160mm excluding connectors.4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya, Deans, 4mm...

Additional Information - ETRONIX JST CHARGING CABLEEtronix Jst Charging CableCable length is 160mm excluding connectors.4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya, Deans, 4mm Bullet /...

Additional Information - ETRONIX TAMIYA CHARGING CABLEEtronix Tamiya Charging CableEtronix Deans Charging CableCable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a...

Additional Information - ETRONIX EC3 CHARGING CABLEEtronix Ec3 Charging CableEtronix Deans Charging CableCable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in...

Additional Information - ETRONIX DEANS CHARGING CABLEEtronix Deans Charging CableCable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30,...

Additional Information - ETRONIX GLOW CHARGING CABLE WITH BANANA PLUGSCable length is 160mm excluding connectors.4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya, Deans, 4mm Bullet / bannana...

Additional Information - ETRONIX XT90 CHARGING CABLECable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya,...

Additional Information - ETRONIX XT30 CHARGING CABLECable length is 160mm excluding connectors.Cable / Wire is 18 AWG gauge (80 degrees 300V)4mm Bannana bullet plug to connect to a chargerAvilable in 18AWG with male XT30, XT60, XT90, EC3, EC5, Tamiya,...

Additional Information - ETRONIX 1-8S LIPO BATTERY VOLTAGE METER W/ALARMWhen the voltage is below the set value, it will buzzer with red LED light.Push key which can change the voltage setting and save.SPECIFICATIONSUse for 1-85...

Additional Information - ETRONIX 1-8S LIPO BATTERY CASED VOLTAGE METER W/ALARMWhen the voltage is below the set value, it will buzzer with red LED light.Push key which can change the voltage setting and save.SPECIFICATIONSUse for 1-85...

Additional Information - ETRONIX TAMIYA TO TRX ONE-PIECE ADAPTOR PLUGSimple way to connect an male Tamiya to battery connector to convert to female TRX Traxxas to connect to an ESC plug.Just 28mm long!

Additional Information - ETRONIX TAMIYA TO XT-60 ONE-PIECE ADAPTOR PLUGSimple way to connect an male Tamiya to battery connector to convert to female XT60 to connect to an ESC plug.Just 28mm long!

Additional Information - ETRONIX TAMIYA TO EC3 ONE-PIECE ADAPTOR PLUGSimple way to connect an male Tamiya to battery connector to convert to female EC3 to connect to an ESC plug.Just 28mm long!

Additional Information - ETRONIX EC3 TO XT-60 ONE-PIECE ADAPTOR PLUGSimple way to connect an male EC3 battery connector to a female XT60 ESC plug.Just 28mm long!

Additional Information - ETRONIX EC3 MALE TO TAMIYA ONE-PIECE ADAPTOR PLUGSimple way to connect an male EC3 battery connector to a female Tamiya ESC.Just 28mm long!

Additional Information - ETRONIX EC3 TO DEANS ONE-PIECE ADAPTOR PLUGSimple way to connect an male EC3 battery connector to a female Dean ESC.Just 28mm long!

Additional Information - ETRONIX FEMALE XT-30 TO MALE DEANS CONNECTOR ADAPTORSmall 28mm total adaptor to convert XT30 ESC to a Deans T-Plug battery connection

Additional Information - ETRONIX EC2 MALE TO FEMALE DEANS ADAPTOR LEADA simple way to convert EC2 Battery to Deand T-Plug ESC connection with a 100mm lead.