RC4WD

Additional Information - M3 x 12mm Set Screw (10)Specifications:Combined Weight: 0.31oz / 9gWhat's Included:10x M3 x 12mm Set Screw (Black)Notes:Uses RC4WD 1.5mm Metric Hex Driver ToolRC4WD 1.5mm...

Additional Information - M3 x 20mm Set Screw (10) Works with any M3 solid Links Specifications: Grade 2 Steel Direct fit for Punisher shafts Direct Fit for Trail Finder 2 What's Included: ...

Additional Information - (10)x M3 X 3mm Set Screw Super strong steel construction! Specifications:Grade 2 Steel Direct fit for Punisher Shafts What's Included: 10x RC4WD M3 X...

M3 X 8mm SHCS to fit Mickey Thompson Classic Lock 40 Series Wheels (10)Specifications:Head OD: 4.7mmCombined Weight: 0.35oz / 10gWhat's Included:10x M3 X 8mm SHCS to fit Mickey Thompson Classic Lock...

Additional Information - M4 20mm long threaded shaft (set screws) (10) Works with any M4 solid Links What's Included: 10x M4 20mm long threaded shaft (set screws)Notes:Uses RC4WD 2.0mm Metric...

Additional Information - M4 E-clip (10)Specifications:OD: 0.35in / 9mmThickness: 0.02in / 0.6mmCombined Weight: 0.1oz / 3gWhat's Included:10x M4 E-clip (Black)

Additional Information - M4 E-clip (10)Specifications:OD: 0.35in / 9mmThickness: 0.02in / 0.6mmCombined Weight: 0.1oz / 3g setWhat's Included:10x M4 E-clip (Silver)

Additional Information - M4 Flanged Lock Nut (Black) What's Included: 5x M4 Flanged Lock Nut (Black)Notes:Uses RC4WD 7.0mm Metric Nut Driver ToolRC4WD 7.0mm Replacement Nut Driver Tip

Additional Information - 7.9mm OD and 4.3mm IDM4 Flat Washer (Black)What's Included:10x M4 Flat Washer (Black)

Additional Information - M4 High Precision Billet Tie Rod End (Silver) (10)Specifications:CNC Machined Billet AluminumFit 4mm Threaded Shaft (M4)Special Protective Silver CoatingPreinstalled with a...

Additional Information - M4 Low Profile Flanged Lock Nut (Black) Shown installed on RC4WD Trail Finder 3 RTR W/ Mojave II Hard Body Set (Z-RTR0045) with Stamped Steel 1.7" 10-Oval Hole Wheels...

Additional Information - M4 X 3mm Set Screw (10)Specifications:Combined Weight: 0.17oz / 5gWhat's Included:10x M4 X 3mm Set Screw (Black)Notes:Uses RC4WD 2.0mm Metric Hex Driver Tool

Additional Information - (10)x M4 X 6mm Set Screw Super strong steel construction! Specifications:Grade 2 Steel Direct fit for Punisher Shafts Direct fit for Z-S0522, Z-S0523,...

Additional Information - M6 E-clip (10)Specifications:OD: 0.47in / 12mmThickness: 0.027in / 0.7mmCombined Weight: 0.14oz / 4g What's Included:10x M6 E-clip (Black)

Additional Information - M6 X 30mm Set Screw (6)What's Included:6x M6 x 30mm Set Screw (Black)Optional parts:1/4 Axle Rear Steering Lockout Kit (Z-S1178)2mm Nylon Spacer with M6 Hole (4)...

Additional Information - RC4WD Marlin Crawler Rear Steel Tube Bumper for Trail Finder 2This has been Officially Licensed by the Marlin Crawler Inc and are only available from RC4WD and our Dealers...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.RC4WD MAXTRAX Vehicle Extraction and Recovery Boards 1/10 (Safety Orange) (2)RC4WD is now teamed up...

Additional Information - Medium Offset Hub for Racing Monster Truck Beadlock Wheels (Flat Hex)Specifications:CNC MachinedBillet AluminumBlack Anodized Finish Fit 12mm HexOD: 1.06in / 27.0mmWidth: 0...

Additional Information - Medium Offset Hub for Racing Monster Truck Beadlock Wheels (Stepped Hex)Specifications:CNC MachinedBillet AluminumBlack Anodized Finish Fit 12mm HexOD: 1.06in / 27.0mmWidth:...

Additional Information - Mega Truck Universal Shaft "Ver 2" (92mm - 130mm / 3.62" - 5.12")Super strong and scale! Can also be used on semi truck, crawler or scale truck. Specifications: ...

Additional Information - Metal Emblem Set for Axial SCX10 XJ (Black)Specifications:Metal Decal SheetLength: 2.09in / 53mmWidth: 1.50in / 38mmShown installed with RC4WD 1/10 Warn 9.5cti Winch...

Additional Information - Metal Shield Bearing 5x11x4mm (10) This is a replacement bearing with a metal shield. Specifications: Size: 5x11x4mm 10 Included in bag ...

Additional Information - D44 Wide Link MountsSpecifications:CNC MachinedBillet AluminumBlack Anodized Finish�?�Total Weight: 0.58oz / 16.5gShown installed on RC4WD Carbon Assault 1/10th Monster Truck...

Additional Information - Metal Drive Coupling for Gelande 2Specifications: CNC Machined Hardened SteelLength: 1.91in / 48.6mmOD: 0.43in / 11mmInner OD: 0.19in / 5mmScrew Holes:...

Additional Information - Metal Drive Extended CouplingSpecifications:CNC MachinedHeavy Duty SteelLength: 2.54in / 64.5mmHead OD: 0.43in / 11mmShaft OD: 0.2in / 4.96mmWeight: 0.56oz / 16gShown...

Additional Information - PLEASE NOTE these are a TOY MODEL item and not for a full sized truck. Metal Emblem Set for Axial SCX10 XJ (Silver) Specifications: Metal Decal Sheet Length: 2.09in /...

Additional Information - PLEASE NOTE these are a Toy Model item and not for a full sized truck.Metal Emblems for Toyota Killerbody LC70Specifications:Metal EmblemsStainless SteelWeight: 0.2oz /...

Additional Information - Metal Exhaust for Axial SCX10 II XJSpecifications:Stainless SteelBlack Powder-coated FinishHand WeldedCorrosion ResistantWeight: 0.31oz / 9gShown installed on Tube Rear...

Additional Information - Metal Exhaust for Gelande II CruiserSpecifications:Stainless Steel Heavy Duty Steel TubeBlack Powder-coated FinishHand WeldedCorrosion ResistantTotal Length: 4.17in / 106...

Additional Information - Metal Exhaust for Gelande II D110Specifications:Heavy Duty Steel TubeBlack Powder-coated FinishHand WeldedCorrosion ResistantWeight: 0.63oz / 18gShown installed on the...

Additional Information - Metal Exhaust for Land Cruiser LC70 BodySpecifications:Stainless Steel Silver Anodized FinishHand WeldedCorrosion ResistantTotal Length: 2.12in / 53.86mmTotal Width: 3.64in /...

Metal Exhaust for Gelande II D90Specifications:Heavy Duty Steel TubeBlack Powder-coated FinishHand WeldedCorrosion ResistantWeight: 0.53oz / 15gShown installed on the Gelande II Truck Kit for example...

Additional Information - PLEASE NOTE - This item is for a TOY model and not a full sized Truck.Metal Front Winch Bumper for Traxxas TRX-4 Land Rover Defender D110Specifications:Stainless SteelABS...

Additional Information - King Kong Mini Tow Shackle Now even smaller. Heavy duty and more scale! Specifications: Heavy duty steel Fit RC4WD Small Scale Hook 1/10 scale Shown...

Additional Information - Jeep is about 20mm and Wrangler 33mm.1/10 Metal Logo for Tamiya CC01 Wrangler Specifications: Weight: 0.1oz / 3gWhat's Included: 2x Jeep Emblem 2x WRANGLER Emblem

Additional Information - RC4WD Rampage Front Recovery BumperBrand New and Licensed by Rampage Products. The Rampage Front Recovery Bumper will work with Axial SCX10 Chassis trucks, or Trail Finder 2...

Additional Information - Metal Rear Emblem for TF2 Mojave Body (Black)Specifications:Metal Decal SheetEtchedSticky Back Adhesive for Easy InstallationLength: 3.93in / 100mmWidth: 1.26in / 32mmShown...

Additional Information - Metal Rear Emblem for TF2 Mojave Body (White) Specifications: Metal Decal Sheet Etched Sticky Back Adhesive for Easy Installation Length: 3.93in / 100mm Width: 1.26in / 32mm...

Additional Information - Roll Bar for Tamiya Body Sets with Light Bar This is a universal light bar for use on Tamiya Body Sets, or lexan bodies. This light bar will mount either the Proline Light...

Additional Information - Metal Roof Rack for Axial SCX10 Wrangler w/ Roof Rack LightsSpecifications:Stainless SteelPowder-coatedHand WeldedFits 3mm LED SetCorrosion Resistant Total Length: 12.16in /...